Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Top Knobs Clemente pull is a transitional bar pull designed for cabinet doors and drawer fronts, mounting on 8-13/16 inch (224 mm) centers and measuring 9-3/4 inches overall.
Spacing at 224 mm is a step up from the more common 160 mm and 192 mm pulls, and the difference is visible the moment the hardware is on the door. At this span the pull stretches across a wide base drawer, a full-height pantry front, or an appliance-adjacent panel in a way that a shorter pull simply cannot — it fills the front rather than sitting in the middle of it. Designers running a horizontal hardware program across a full run of base cabinetry reach for pulls at this center-to-center because the longer span reads as a continuous line rather than a series of dots. The Clemente pull works in that role: long enough to register, narrow enough at 7/16 inch to stay light on the face.
The Clemente pull is constructed from stainless steel rather than from zinc with a plated surface. Polished Stainless Steel is a genuine mirror finish on a stainless substrate, which means the brightness comes from the metal itself and not from a coating applied over a softer alloy. In a kitchen already running brushed or polished stainless appliances, that matters: the finish holds its tone in a way that a plated alternative may not over time. The polished surface will show fingerprints, which is the trade-off for the high-sheen look, and it wipes clean easily. At 1-1/4 inches of projection the grip clears the door face without reaching far enough to catch on adjacent fronts or clothing.
This pull suits a kitchen, bath, or built-in where the drawer and door fronts are wide and the hardware program needs to keep pace with that scale. Cabinet shops and designers running transitional kitchens with stainless appliances often land here because the pull ties the hardware to the appliance package in finish and in proportion. Homeowners replacing hardware on a full run of base drawers or on a single large pantry door will find the 224 mm spacing is matched to the front size in a way a shorter pull is not. Because the Clemente collection includes companion pieces at the same finish and design language, mixing pulls on wide drawers with a coordinating knob on upper doors is straightforward within the series.
Yes. The Material Type is stainless steel, so the substrate and the surface are the same metal rather than a plated coating over a different base alloy.
The Polished Stainless Steel finish is a bright, mirror-polished surface. Appliance finishes vary by manufacturer and are often brushed rather than polished, so the tone may differ. Compare samples if an exact match is critical.
8-13/16 inches (224 mm) is the center-to-center spacing, which is the distance between the two mounting holes — the number to match when replacing existing hardware or drilling new holes. 9-3/4 inches (248 mm) is the overall end-to-end length of the pull, which governs how much space it occupies on the door face.
At this center-to-center span, the pull suits wide drawer fronts and full-height or pantry-scale door fronts best. It will mount on any front drilled to 224 mm centers.
When the fronts are wide and the design calls for stainless, the Clemente pull in Polished Stainless Steel earns its place as the hardware that holds the run together from end to end.
Sold In: 1 Each