Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
10 inch melamine saw blade describes this Amana Tool circular saw blade designed for double-face melamine work where clean edges matter. The 80 teeth on the blade spread cutting load across more points, which supports smoother cutting on melamine surfaces. Large European style microgram carbide tips provide a robust cutting edge, so the blade stays usable over more work before sharpening. The blade uses Electro-Blu Non-Stick Coating, which reduces resin accumulation, helping the plate run more freely in melamine and similar sheet goods. This coating also reduces heat build-up, helping the plate stay stable during longer cuts. The blade has a double-face melamine focus, so it is set up for jobs where both sides of the panel need a clean finish. Being a circular saw blade from Amana Tool places it within a known line of bits, blades and cutters aimed at woodworking.
This Amana Tool circular saw blade uses an H7 concentric bore, so the bore is manufactured for a tight, accurate fit on the saws arbor. That tight fit helps the blade run true with reduced circular run-out during operation. Laser-cut expansion slots are present in the plate, so as the blade warms under load, the slots help control expansion and maintain plate stability. Unique technology for straightening, balancing and tensioning is applied to the plate, so the running characteristics are tuned for smoother operation on melamine work. Copper plugs are set into the blade body, which work to reduce turbulent noise and vibration during cutting. Large gullets at the tooth line assist with chip clearance, helping chips move away from the bore area and maintaining a clear path through double-face melamine.
This 10 inch x 80 teeth Electro-Blu Non-Stick Coated Double-Face Melamine Saw Blade is positioned for cutting double-face melamine where both faces of the sheet need a clean result. The 80 tooth count spreads work over more cutting edges, which supports fine-finish cuts on melamine panels. Large European style microgram carbide tips on each tooth offer a substantial carbide mass, which serves high-use cabinet or panel work where blades see many linear feet of cutting. The Electro-Blu Non-Stick Coating is applied using an electrostatic bonding process, so the coating adheres consistently to the blade body and tooth area, which helps limit resin build-up in melamine operations. Reduced resin accumulation allows the blade to stay closer to its intended geometry, supporting repeatable results across repeated cuts. Tips stay sharper longer with this carbide and coating combination, supporting extended blade life on melamine and similar sheet stock.
Laser-cut expansion slots in the blade body are specifically used to assure plate stability, so when the blade heats under continuous cutting, the plate stays flatter and tracks more predictably. This stability supports straight, accurate cuts along melamine edges. Unique technology for perfect straightening, balancing and tensioning is applied to the plate, so the blade runs with reduced wobble and improved balance, which helps minimize chatter on the finished faces. The H7 concentric bore provides a tight fit to the arbor, which helps eliminate both circular run-out and vibration, keeping the tooth path consistent relative to the fence. Copper plugs installed in the plate reduce turbulent noise and vibration, so the saw feels more controlled, supporting steadier feed on long rips or crosscuts. Large gullets between the 80 teeth are shaped for improved chip clearance, so chips exit the kerf efficiently, helping preserve clean edges on double-face melamine sheets.
The 10 inch x 80 Teeth Electro-Blu Non-Stick Coated Double-Face Melamine Saw Blade is described for double-face melamine, so it is focused on melamine sheet applications.
The Electro-Blu Non-Stick Coating reduces resin accumulation and heat build-up, so the blade runs freer in the cut and supports more stable performance on melamine panels.
The large European style microgram carbide tips offer more carbide at each tooth, so tips stay sharper longer, extending blade life in melamine cutting operations.
Laser-cut expansion slots are used to assure plate stability, so as the blade heats during use, the plate stays flatter and supports straighter cuts in double-face melamine.
The H7 concentric bore enables a tight fit to the arbor, which eliminates circular run-out and vibration, supporting more accurate and repeatable cuts.
Copper plugs in the blade body reduce turbulent noise and vibration, so the blade runs smoother and supports controlled feeding during melamine cutting.
The 10 inch x 80 Teeth Electro-Blu Non-Stick Coated Double-Face Melamine Saw Blade from Amana Tool combines large European style microgram carbide tips, an H7 concentric bore, and laser-cut expansion slots to support stable, accurate melamine cutting. Electro-Blu Non-Stick Coating reduces resin accumulation and heat build-up, helping the blade stay effective across longer runs. Copper plugs reduce turbulent noise and vibration, contributing to a smoother running saw. For jobs centered on double-face melamine where edge quality, plate stability and reduced vibration matter, this MB10800C circular saw blade aligns well with those demands.