Formica 6130-58 Chambray Fabric laminate is a postform grade decorative laminate sheet sized 30 x 144 inches for interior applications. This sheet uses Grade 12 postforming construction with approximately 0.035 inch (0.9mm) thickness, which supports forming decorative edges instead of relying on sharp corners. The Chambray Fabric design is part of the Formica Laminate Fabric Collection, created for commercial design that seeks warmth and effortless elegance, so workspaces and public areas gain a soft, textile-inspired visual while using a hard surface. The surface uses 58 matte finish, which imparts a warm, pleasing effect to the color and pattern, helping the Chambray Fabric look more like a subtle woven material in service. This matte finish also enhances clarity and depth, which keeps the visual from flattening out under normal interior lighting. The laminate is recommended for horizontal and vertical interior applications, so one design can carry across worktops, wall panels, and casework faces.
This Formica Chambray Fabric laminate uses Grade 12 postforming construction that is postformable to permit bending on suitable commercial postforming equipment, so fabricators can heat and form the sheet rather than cut, edge, and seam every exposed corner. The optimum postforming temperature of 325 F (163 C) defines the heat profile for forming operations, supporting consistent results across runs when setting up equipment. Outside radius capability down to 1/2 inch and cove radius down to 3/16 inch establishes the minimum shapes achievable, which guides profile design before templates are created. The laminate is recommended for horizontal and vertical interior applications, so the same sheet can handle worktops, fronts, and wall areas in one coordinated material choice.
This Formica 6130-58 Chambray Fabric laminate is part of the 2023 Formica Laminate Fabric Collection, which serves commercial design seeking warmth and effortless elegance with durable, easily cleaned surfaces. That combination fits reception desks, work counters, and other interior applications where a textile-inspired look is desired but a hard, cleanable surface is required. The Grade 12 postforming design at about 0.035 inch thickness supports wrapped edges and coved corners on suitable commercial postforming equipment, so tops, fronts, and short returns can be laid out as flowing forms. The recommended use on horizontal and vertical interior applications allows the Chambray Fabric pattern to extend from counters onto wall cladding or casework, giving a continuous visual field. The 58 matte finish adds a warm, pleasing effect to the color and pattern, which keeps the fabric visual from appearing harsh under typical interior lighting.
Grade 12 postforming construction defined at 0.035 inch (0.9mm) thickness provides a predictable laminate section, which supports consistent heat penetration and bending performance across sheets of Formica Grade 12 postforming laminate. The optimum postforming temperature of 325 F (163 C) anchors process settings, helping fabricators tune dwell time and heater distance for repeatable forming results. The ability to form an outside radius down to 1/2 inch (12.7mm) and a cove radius down to 3/16 inch (4.8mm) sets clear profile limits, which simplifies tool and form design when building postforming setups. The 58 matte finish, recommended for horizontal and vertical interior applications, behaves as a unified surface gloss across solids, patterns, and woodgrains, so mixed-design installations can run through the same forming and layup workflow while keeping a consistent sheen level.
The Formica 6130-58 Chambray Fabric laminate sheet is 30 x 144 inches, providing a long run that supports continuous tops or panels without frequent seams in many interior layouts.
The Chambray Fabric laminate is Grade 12 postforming at about 0.035 inch (0.9mm) thickness, giving a balance of flexibility for forming and body for typical interior laminate fabrication.
This Formica Grade 12 postforming laminate can be postformed to an outside radius down to 1/2 inch and a cove radius down to 3/16 inch, supporting tight edge and backsplash profiles.
This Formica Chambray Fabric postforming grade laminate has an optimum postforming temperature of 325 F (163 C), providing a target setting for commercial postforming equipment during bending operations.
The Chambray Fabric laminate with 58 matte finish is recommended for horizontal and vertical interior applications, so it suits tops, fronts, and wall areas in interior spaces.
The 58 matte finish imparts a warm, pleasing effect that enhances color, clarity, and depth, helping the Chambray Fabric pattern present as a refined, fabric-inspired surface in interior projects.
The Formica 6130-58 Chambray Fabric laminate combines Grade 12 postforming construction, 30 x 144 inch sheet size, and 58 matte finish to support decorative and functional forming in interior applications. The ability to postform outside radii down to 1/2 inch and cove radii down to 3/16 inch lets commercial shops run wrapped fronts and coved backsplashes from this single design. The Chambray Fabric visual from the Formica Laminate Fabric Collection brings warmth and effortless elegance to commercial projects while delivering a durable, easily cleaned surface. For projects needing a textile-inspired look with proven Formica postforming performance, this laminate aligns design intent with efficient fabrication.
Sold In: 1 Sheet