Formica gray fabric laminate is a Grade 12 postforming high-pressure laminate sheet sized 30 inches by 120 inches for interior applications that call for a continuous, durable decorative surface. The Gray Fabric design comes from the Formica Laminate Fabric Collection, which offers linen-inspired visuals for commercial design seeking warmth and effortless elegance, giving fabric character in a hard-surface material. This sheet uses Grade 12 postform grade at 0.035 inch, or 0.9mm, thickness, so it can be formed on suitable commercial postforming equipment where wrapped or contoured edges are required. The laminate is postformable to permit bending for decorative or functional purposes on interior installations, helping carry the surface over edges instead of relying on separate build-ups. The 6129-58 designation identifies the Gray Fabric pattern in a 58-Matte Finish, pairing a fabric look with a low-sheen surface in one coordinated sheet.
This Formica 6129-58 laminate uses Grade 12 postforming construction so it is postformable to permit bending on suitable commercial postforming equipment for interior work. The sheet can be formed to an outside radius to 1/2 inch, or 12.7mm, which lets installers carry the Gray Fabric surface around typical front edges on counters or casework without interrupting the pattern. It also supports a cove radius to 3/16 inch, or 4.8mm, so the decorative face continues through inside curves on interior applications. The optimum postforming temperature of 325 degrees F, or 163 degrees C, defines the heat range where the sheet is designed to form, supporting predictable handling during production. The 58-Matte Finish is recommended for horizontal and vertical interior applications, so the same finish can be used across worktops, casework faces, and wall areas for a unified appearance.
Formica 6129-58 Gray Fabric Laminate is part of the 2023 Formica Laminate Fabric Collection, so its linen-inspired visual is aimed at commercial design that seeks warmth and effortless elegance along with durable, easily cleaned surfaces. The Grade 12 postforming build allows this 30 inch by 120 inch sheet to be used wherever forming is desired for decorative or functional purposes in interior applications, such as wrapped front edges or shaped vertical panel details. Because the laminate is postformable to an outside radius to 1/2 inch, or 12.7mm, it suits work where a continuous Gray Fabric surface is carried over a rounded edge rather than ending at a square profile. Its ability to form to a cove radius to 3/16 inch, or 4.8mm, fits inside corners on interior components that need the same Gray Fabric look to transition into recessed areas.
The Grade 12 postforming structure at 0.035 inch, or 0.9mm, thickness gives the laminate enough body for interior duty while still responding predictably on suitable commercial postforming equipment, which supports repeatable forming across multiple identical parts in a production run. The optimum postforming temperature of 325 degrees F, or 163 degrees C, ties directly to shop process control, since heating routines can be tuned around this value to keep bending behavior within the intended range. The 58-Matte Finish imparts a warm, pleasing effect that enhances the beauty of the Gray Fabric color and pattern, which matters when the design intent is a textile-inspired look rather than a high-gloss reflection. That matte surface is recommended for horizontal and vertical interior applications, allowing tops, fascia, and wall elements to share the same sheen level for visual continuity. Formica states that when used with a gloss finish, Grade 12 is recommended for light-duty horizontal applications, which clarifies the performance expectation for that grade in higher-sheen uses.
Formica 6129-58 Gray Fabric Laminate is supplied as a 30 inch by 120 inch sheet, so it spans longer interior runs while still fitting common fabrication equipment.
The Grade 12 postforming construction is postformable, permitting bending on suitable commercial postforming equipment for decorative or functional interior applications where forming is desired.
The laminate can be postformed to an outside radius to 1/2 inch, or 12.7mm, and a cove radius to 3/16 inch, or 4.8mm, allowing both outside and inside curves in interior designs.
The laminate has an optimum postforming temperature of 325 degrees F, or 163 degrees C, which guides how it is heated during forming for consistent bending behavior.
The 58-Matte Finish is recommended for horizontal and vertical interior applications, so it is suitable for worktops, casework faces, and wall surfaces using the same finish.
The Gray Fabric laminate is part of the Formica Laminate Fabric Collection, providing a linen-inspired visual aimed at commercial design seeking warmth and effortless elegance.
Choose Formica gray fabric laminate when a Grade 12 postforming sheet with a linen-inspired visual is needed for interior work that benefits from wrapped edges or contoured details. The 30 inch by 120 inch size, 0.035 inch thickness, and ability to form to outside and cove radii help bring the Gray Fabric design across both flat and curved surfaces. The 58-Matte Finish, recommended for horizontal and vertical interior applications, supports using one finish throughout worktops and wall or panel elements so the project carries a consistent, warm fabric-inspired look.
Sold In: 1 Sheet