Century Cascade 11-7/8" Birch Bottom Mount Waste Pullout with 1-50 Quart White Bin Soft-Close, CASBM115-50PF

Century Cascade 11-7/8 Inch Waste Pullout Use

Century Cascade 11-7/8 inch waste pullout describes a Century Components bottom mount trash pullout built from Baltic Birch for cabinet waste storage, so a cabinet installer or serious DIY user can organize trash in a fixed cabinet opening. The unit is part of the Century Cascade line and is classified as a bottom mount trash pullout, so it is designed to sit on the cabinet floor and slide out for access instead of swinging on hinges. The waste pullout is designed around one 50 quart white bin, so it supports a sizable single-container trash setup in a kitchen or bath cabinet. The construction uses Baltic Birch without edge-banding and is beautifully prefinished with a natural finish, so the wood box presents a clean, finished look inside the cabinet while avoiding raw, unfinished surfaces.

Key Details That Drive Daily Pullout Performance

• The unit uses Blum Tandem 100 lb slides, so the waste pullout rides on concealed runners rated for substantial load, which supports the weight of a full 50 quart bin and smooths motion during everyday use.
• It is classified as a bottom mount trash pullout with floor mounting brackets, so the assembly anchors to the cabinet floor, which helps keep the slide alignment stable over time under repeated openings.
• The waste pullout uses Baltic Birch construction without edge-banding and a natural prefinished surface, so the box interior is smooth and sealed, which simplifies wipe-down cleaning around the bin area.
• The CASBM115-50PF model is built for a single 50 quart white bin, so cabinet space is dedicated to one large container, which suits applications where high trash capacity in one compartment is preferred.
• The Century Components brand positions this unit within a kitchen and bath cabinet accessories trash pull-outs category, so it fits naturally into cabinet layouts that call for integrated waste management within casework.

Bottom Mount Waste Pullout Mounting And Door Setup

This bottom mount trash pullout uses floor mounting brackets, so the installer fastens the system down to the cabinet floor, which provides a defined reference plane for setting slide location and alignment. The Blum Tandem 100 lb slides are part of the assembly, so the sliding motion is guided along undermounted runners, which helps the bin move straight in and out without racking in the opening. Four adjustable door mounting brackets are built into the design, so the cabinet door attaches directly to the pullout, which creates a one-step waste access motion instead of separate door and bin actions. Those four door mounting brackets provide horizontal adjustment as well as door tilt control, so the installer can fine-tune door reveal and angle relative to the cabinet face, which helps align the door with adjacent fronts in a run of cabinets.

Using This Bottom Mount Trash Pullout In Cabinets

Where This 11-7/8 Inch Pullout Works Best

This Century Components bottom mount trash pullout is categorized under kitchen and bath cabinet accessories, so it is intended for use inside cabinets rather than as a freestanding container. The 11-7/8 inch reference in the name points to the size family, so it suits cabinet layouts sized around that width range, allowing the installer to plan openings that match this pullout footprint. With one 50 quart white bin as its core capacity, the unit fits jobs where a single large receptacle is preferred, such as primary kitchen trash or a single-stream collection point in a bath or utility cabinet. The natural prefinished Baltic Birch body lets the pullout sit in visible cabinet interiors without unfinished wood, so it is suitable for installations where clients will routinely see the interior when the pullout is extended.

Details That Support Consistent Sliding And Alignment

The Blum Tandem 100 lb slides specified for this waste pullout provide the load rating and guidance for the moving section, so the pullout continues to run on stable undermount tracks even as the 50 quart bin fills. Floor mounting brackets tie the slide assembly to the cabinet bottom, so the slides remain referenced to a fixed surface, which supports reliable parallel action and reduces the tendency for the unit to shift in use. Four adjustable door mounting brackets supply both horizontal adjustment and door tilt control, so the installer can move the attached door left or right and tweak the lean, which helps dial in an even gap between neighboring doors and drawer fronts. The Baltic Birch construction without edge-banding and with a natural prefinished surface keeps the structure rigid and sealed at the same time, so the pullout maintains its shape while presenting a smooth, finished interior around the bin.

Common Questions About The CASBM115-50PF Pullout

Choose This Pullout For Integrated Cabinet Waste

The Century Cascade 11-7/8 inch Birch bottom mount waste pullout with one 50 quart white bin and soft-close action focuses cabinet space on a single, high-capacity container, so it suits kitchen and bath layouts that prioritize large trash volume. With Blum Tandem 100 lb slides, floor mounting brackets, and four adjustable door mounting brackets providing horizontal and tilt adjustment, the CASBM115-50PF model supports dialed-in door alignment and stable sliding in daily use. The Baltic Birch construction without edge-banding and the natural prefinished surface keep the interior visually clean, so it works well in projects where cabinet interiors are part of the overall presentation.