Century Cascade 11-7/8" Birch Bottom Mount Waste Pullout with 2-34 Quart Grey Bins Soft-Close, CASBM115-34PF-GR

Century Cascade Bottom Mount Waste Pullout Use

Century Cascade 11-7/8 bottom mount waste pullout is a Baltic Birch plywood trash pull-out that organizes a cabinet opening into a dedicated waste station using two 34 quart grey bins. The strong dovetail construction ties the sides together so the pullout acts as a single rigid unit under load, which helps it track smoothly in daily use. The natural prefinished surface on the Baltic Birch plywood arrives ready for cabinet installation, so it drops into finished kitchens without extra finishing steps. The unit top is routed out to perfectly match the profile of 34 and 50 quart bins, which cradles the bin rims and keeps them from shifting when the drawer is cycled. This model is part of the Century Components Cascade series of bottom mount trash pullouts, giving installers a defined solution for waste management inside kitchen or bath cabinets.

Key Details That Support Cabinet Projects

• The Baltic Birch plywood construction creates a stable platform, so the pullout resists flexing in use and supports the 34 quart bins during full extension.
• Strong dovetail construction at the joints locks the frame together, which holds alignment under repeated openings and helps the slides perform consistently.
• The natural prefinished surface on the wood provides a ready-to-use appearance inside the cabinet, saving finishing steps while presenting a clean interior look.
• The unit top routed to match 34 and 50 quart bin profiles seats the bin rims positively, reducing rattle and keeping the bins located during slide travel.
• Two 34 quart grey bins define generous waste capacity inside a standard cabinet footprint, supporting segregated trash or recycling setups as needed.

Installation, Mounting, And Adjustment Details

This Century Components bottom mount trash pullout uses Blum 170lb rated MOVENTO soft-close under mount slides, giving the installer a concealed slide system that supports substantial loaded weight. The MOVENTO slides provide left and right as well as up and down adjustability, which lets the installer fine tune the pullout position relative to the cabinet opening and face. Floor mount brackets on the slides allow the pullout to fasten to the cabinet floor, an approach that suits many framed and frameless layouts. Four adjustable door mounted brackets offer horizontal adjustment and door tilt control, so the attached door can be aligned to adjacent fronts. The assembly works for inset and full overlay applications, covering common door styles with the same waste pullout platform.

Where This Waste Pullout Fits And Performs

Bottom Mount Trash Pullout In Cabinet Use

This bottom mount trash pullout sits on the cabinet floor as part of the Kitchen & Bath Cabinet Accessories category, so it occupies space that might otherwise be unused. As a product in the Bottom Mount Trash Pullouts class, it is designed specifically to support trash management behind a cabinet door instead of on shelves. The cabinet-mounted design works with inset and full overlay door applications, helping the same mechanism serve different face treatments on built-in cabinetry. Two 34 quart grey bins ride in the routed top, so each bin stays located while the cabinet door opens and closes. The Century Components Baltic Birch plywood construction with dovetail joints integrates into wood cabinet interiors, aligning visually with other wood components.

Adjustment Features For Precise Door And Slide Alignment

Blum 170lb rated MOVENTO soft-close under mount slides sit under the pullout, so the weight rests on concealed hardware and the motion remains controlled at full extension. The 170lb rating gives the assembly capacity for loaded 34 quart bins while maintaining smooth operation. Left and right as well as up and down adjustability in the MOVENTO system allows installers to shift the pullout position to square it within the opening and align reveals. Floor mount brackets on the Blum under mount slides secure the pullout footprint, so the unit stays fixed while adjustments are dialed in. Four adjustable door mounted brackets furnish horizontal adjustment and door tilt control, giving independent control over door plane and spacing next to neighboring fronts. Because the unit works for inset and full overlay applications, these adjustment features help set consistent gaps and flushness in both construction styles.

Common Questions About Century Cascade Waste Pullout

Select This Waste Pullout For Cabinet Projects

The Century Cascade 11-7/8 bottom mount waste pullout with two 34 quart grey bins combines Baltic Birch plywood, dovetail construction, and Blum 170lb rated MOVENTO soft-close under mount slides into a single trash management unit. The routed top matched to 34 and 50 quart bin profiles stabilizes the bins for everyday use, while the floor mount brackets tie the assembly to the cabinet base. Four adjustable door mounted brackets with horizontal and tilt control, together with MOVENTO left/right and up/down adjustability, support precise alignment in inset and full overlay applications. For cabinet projects that call for a defined trash pull-out built from Century Components, this model provides a focused, bottom mount solution.