Century Edge 11-3/8" Birch Bottom Mount Waste Pullout with 1-50 Quart White Bin Soft-Close, EDGBM110-50PF
Description
Century Edge Waste Pullout For Cabinet Trash
Century Edge waste pullout is a bottom mount trash pullout built for kitchen and bath cabinets where a single 50 quart bin is needed in a compact opening. The unit is made from Baltic Birch, so the pullout box provides a sturdy wooden structure that stands up to regular cabinet use. It is beautifully prefinished with a natural finish, giving the interior of the cabinet a clean, finished look without additional finishing steps. This bottom mount design fits the trash pullout to the cabinet floor, which helps keep loads supported while the bin is extended. The integrated soft-close function with Blum Tandem 100 lb slides allows the pullout to close smoothly under load, which helps reduce slamming and wear on the cabinet. With its 11-3/8 inch sizing, the unit is suited to narrow base cabinet layouts that still need a full 50 quart capacity.
Key Details That Support Everyday Cabinet Use
- Made from Baltic Birch without edge-banding, the structure gives a solid wood platform that holds the 50 quart bin while keeping the sides clean and simple for straightforward integration into custom cabinetry.
- Beautifully prefinished with a natural finish, the birch surfaces arrive ready for installation, which saves finishing steps and provides a smooth interior that is easier to wipe down during routine cabinet cleaning.
- Blum Tandem 100 lb slides support soft-close action, so the pullout can handle the weight of a full 50 quart bin while closing gently, helping limit stress on the cabinet case and maintaining a tidy, quiet operation.
- Floor mounting brackets are part of the slide system, giving a stable bottom mount connection to the cabinet floor that helps keep the pullout aligned and tracking properly through full extension.
- Four adjustable door mounting brackets provide horizontal adjustment and door tilt control, so the attached cabinet door can be aligned with adjacent fronts for a consistent reveal and a professional finished appearance.
Bottom Mount Trash Pullout Fit And Setup
This bottom mount trash pullout is designed to fasten to the cabinet floor using the provided floor mounting brackets, which establishes the working position of the 11-3/8 inch wide frame inside the opening. Once mounted, the Blum Tandem 100 lb slides carry the pullout in and out of the cabinet on concealed runners, which supports full bin extension while keeping hardware hidden. The soft-close feature built into these slides pulls the unit closed for the last part of travel, which helps cabinets line up cleanly when the door is shut. Four adjustable door mounting brackets tie the cabinet door to the pullout frame and provide both horizontal movement and door tilt control, making it possible to fine-tune the door position relative to adjacent drawers and doors after installation.
Using This Baltic Birch Waste Pullout In Cabinets
Where This Bottom Mount Pullout Fits Best
This Century Components bottom mount trash pullout is part of the Edge Series, which is described as an economical choice for kitchen and bath cabinet layouts that still benefit from a dedicated pullout for waste. With an 11-3/8 inch sizing and a single 50 quart white bin, it fits projects that need significant trash capacity in a relatively narrow cabinet footprint, such as smaller base cabinets beside sinks or work areas. The use of Baltic Birch without edge-banding creates straight, square sides that work well in frameless or face-frame cabinet interiors where installers want a simple wood box appearance. Because the pullout is mounted to the floor using floor mounting brackets, it is well suited to new cabinet construction or retrofits where the cabinet bottom can serve as the primary structural support.
The 50 quart white bin provides a large central container for kitchen or bath waste, which can help reduce emptying frequency in busy residential or light commercial spaces. The beautifully prefinished natural birch ties into many cabinet interior schemes, supporting both painted and stained face treatments by keeping the inside of the cabinet bright and neutral. As part of the Edge Series, the combination of Baltic Birch and Blum Tandem 100 lb slides gives projects a cost-conscious solution while still delivering soft-close action and a wooden pullout frame. Available in both 34 and 50 quart bin sizes, this specific configuration focuses on maximum single-bin volume for installers who prioritize capacity over multiple smaller bins.
Details That Help Alignment And Repeatable Results
The use of Blum Tandem 100 lb slides is central to how this waste pullout performs in service. These slides are rated for 100 lb, so they provide support for the weight of a fully loaded 50 quart bin plus the birch frame, helping the pullout run smoothly even when heavily used. Because the Tandem slides are concealed, they keep hardware out of sight when the pullout is extended, which maintains a clean presentation and reduces snag points around the bin. Soft-close action is integrated into these slides, pulling the unit closed in a controlled motion that helps the door settle into the same position each time.
Four adjustable door mounting brackets are built into the design, and they provide both horizontal adjustment and door tilt control. Horizontal adjustment helps shift the attached cabinet door left or right to align with neighboring fronts, supporting consistent reveals in a run of cabinetry. Door tilt control allows the top and bottom of the door to be brought into plane with adjacent doors, which is important for maintaining even shadow lines across a bank of cabinets. Floor mounting brackets connect the birch frame to the cabinet bottom, holding the pullout square so these adjustments stay stable over repeated cycles. The natural prefinished Baltic Birch surfaces also give a predictable, smooth base that helps the bin slide in and out of the frame without catching.
Common Questions About This Trash Pullout
What type of product is the Century Edge waste pullout?
The Century Edge waste pullout is a bottom mount trash pullout with a single 50 quart white bin, so it provides a slide-out waste solution inside a kitchen or bath cabinet.
How does the bottom mount design affect cabinet installation?
The bottom mount design uses floor mounting brackets that fasten to the cabinet bottom, so the pullout is supported by the cabinet floor and stays aligned during repeated use.
What slides are used on this 50 quart trash pullout?
This 50 quart trash pullout uses Blum Tandem 100 lb slides, which provide concealed full-extension support and soft-close action for the loaded bin and birch frame.
What material is the pullout frame made from?
The pullout frame is made from Baltic Birch without edge-banding, giving a sturdy wooden structure with clean edges that integrates well into cabinet interiors.
How do the door mounting brackets help alignment?
Four adjustable door mounting brackets provide horizontal adjustment and door tilt control, so the attached door can be tuned to match adjacent cabinet fronts.
What finish is on the Baltic Birch waste pullout?
The Baltic Birch waste pullout is beautifully prefinished with a natural finish, giving the interior a clean look while providing a smooth surface for regular cleaning.
Selecting This Waste Pullout For Your Project
The Century Edge waste pullout brings together a Baltic Birch frame, a 50 quart white bin, and Blum Tandem 100 lb soft-close slides to form a practical trash solution for kitchen and bath cabinets. Its bottom mount layout with floor mounting brackets suits new builds and retrofits where the cabinet bottom can support the load. Four adjustable door mounting brackets supply horizontal and tilt adjustment, which supports precise door alignment in a run of cabinets. For projects that need an economical, prefinished waste pullout with substantial capacity in an 11-3/8 inch footprint, this Century Components unit provides a focused option ready to integrate into the cabinet layout.
