Century Signature 11-7/8" Maple Bottom Mount Waste Pullout with 1-50 Quart White Bin Soft-Close, SIGBM115-50PF

Century Signature Maple Waste Pullout With 50 Qt Bin

Century Signature 11-7/8" maple bottom mount waste pullout is a bottom mount trash pullout that organizes waste in a dedicated cabinet space using a solid maple structure, which helps keep kitchen workflows predictable and tidy. The product is built around a solid wood maple box with strong dovetail construction, so the pullout resists joint separation during repeated opening and closing in busy kitchens. A 60 sheen conversion varnish and natural finish seal the maple surfaces, which supports long-term use by protecting the wood as the bin is moved in and out. The solid maple face frame top is routed out to match the profile of 34 and 50 quart bins, so the bin nests into the frame and stays aligned during movement. This model is supplied with one 50 quart white bin, so a standard household trash volume is handled in a single pullout position.

Key Trash Pullout Details For Kitchen Projects

• The solid wood maple box with strong dovetail construction forms a rigid carriage for the bin, which matters when the bin is fully loaded so the assembly tracks smoothly on its slides.
• The beautifully prefinished natural finish with a 60 sheen conversion varnish gives the visible maple components a clean, consistent look, which helps the pullout match upgraded cabinet interiors.
• The solid maple face frame top is routed to match the profile of 34 and 50 quart bins, so the bin lip seats accurately and reduces side-to-side movement as the pullout is cycled.
• Four adjustable door mounted brackets provide horizontal adjustment and door tilt control, which lets the installer fine-tune the door position relative to adjacent fronts after the pullout is mounted.
• The design works for inset and full overlay applications, so the same waste pullout can be used across different door construction styles within the same project layout.

Bottom Mount Pullout Fit And Adjustment Details

This bottom mount trash pullout fastens through the maple box into the cabinet floor, so the cabinet interior floor becomes the reference plane for the slides and bin movement. The four adjustable door mounted brackets provide horizontal adjustment, which helps align the door gap with neighboring fronts after final installation. The same brackets also provide door tilt control, which allows the top and bottom reveals to be balanced when the cabinet face is flush. Because the unit works for inset and full overlay applications, the adjustment range in the brackets supports both door conditions from a single product configuration. The routed maple face frame top that matches 34 and 50 quart bin profiles holds the 50 quart white bin steady as the door and slide adjustments are dialed in.

Using This Bottom Mount Trash Pullout In Cabinet Runs

Where This SIGBM115-50PF Waste Pullout Fits Best

This Century Components bottom mount trash pullout, identified as SIGBM115-50PF, is suited to kitchen and bath cabinets where a 50 quart white bin is desired in a single pullout bay, because the maple face frame top is routed to match 34 and 50 quart bin profiles. The 11-7/8 inch configuration aligns with standard cabinet interior widths in many kitchen layouts, so it can occupy a dedicated waste cabinet between working base units. Using a solid wood maple box with dovetail construction allows this pullout to sit in higher-end cabinet lines where exposed interior hardware is expected to match wood drawer boxes. The natural prefinished maple with a 60 sheen conversion varnish coordinates with clear-finished cabinet interiors, so the pullout does not visually disrupt a continuous maple or light-wood theme.

Adjustment Features That Support Repeatable Door Alignment

The four adjustable door mounted brackets on this soft-close waste pullout give horizontal adjustment, so the installer can shift the door left or right until the reveal is even with adjacent doors and drawer fronts. The same brackets also offer door tilt control, which provides a way to correct a slight top or bottom angle so the door edge tracks parallel to neighboring faces across its full height. Because the pullout works with inset and full overlay applications, the usable adjustment range supports both a door that sits flush with the face frame and a door that overlays the cabinet box. The solid maple face frame top that is routed to match the bin profile helps hold the 50 quart white bin steady during this fine-tuning, so the load remains centered while alignment is adjusted. The solid maple box and dovetail construction maintain squareness during these adjustments, which helps the soft-close slides perform consistently over repeated use.

Common Questions About This Century Waste Pullout

Select This Waste Pullout For Maple Cabinet Interiors

The Century Signature 11-7/8" maple bottom mount waste pullout with 1-50 quart white bin soft-close brings a solid wood maple box, dovetail construction, and a routed maple face frame into one coordinated trash solution. The natural prefinished maple with a 60 sheen conversion varnish meshes with premium cabinet interiors, while the four adjustable door mounted brackets deliver horizontal and tilt control that supports precise front alignment. For projects using inset or full overlay applications that call for a single 50 quart white bin in a bottom mount configuration, this SIGBM115-50PF pullout offers a focused, cabinet-ready waste station choice.