Century Signature 14-7/8 maple waste pullout is a bottom mount trash pullout that organizes two 50 quart grey bins in a solid wood maple box, so the waste station stays contained inside the cabinet instead of sitting loose on the floor. The solid wood maple box is built with strong dovetail construction, which keeps joints tight under daily extension and retraction. A solid maple face frame top is routed out to perfectly match the profile of 34 and 50 quart bins, so the bins sit located in their openings instead of shifting around when the slide moves. The box is beautifully prefinished with a natural finish and a 60 sheen conversion varnish, giving the wood a smooth sealed surface that stands up to everyday cabinet use and wipes down easily. This pullout works as a bottom mount trash solution wherever a 14-7/8 inch wide unit is planned.
Blum 170 lb MOVENTO soft-close under mount slides support the pullout from below, so the load is carried on hidden slides that leave the maple box sides clear and present a finished interior. These MOVENTO under mount slides are rated at 170 lb, which handles the combined weight of two 50 quart grey bins, their contents, and the maple box. The MOVENTO slides provide soft-close action, so the pullout slows and closes into the cabinet without slamming when pushed. Left/right and up/down adjustability is built into the MOVENTO under mount slides, which lets the installer fine-tune the position of the pullout relative to the cabinet opening for smooth travel. Floor mount brackets work with the under mount slides so the unit fastens to the cabinet floor, tying the slide system directly to the cabinet base.
This Century Components bottom mount trash pullout is designed for use in kitchen and bath cabinets where a bottom mounted waste station is preferred. The 14-7/8 inch width aligns with common cabinet layouts that allow a dedicated trash bay next to sinks or prep zones. Two 50 quart grey bins sit in the routed maple face frame top, so high-volume waste or recycling can be handled inside a single cabinet opening. This design works for both inset and full overlay applications, which means the same pullout style can be used across different door treatments in a project. In a shop or break room cabinet, the solid maple box and routed top keep large bins positioned for repeated daily use.
Four adjustable door mounted brackets support horizontal adjustment and door tilt control, so the attached cabinet door can be aligned to surrounding fronts after the pullout is installed. Horizontal adjustment allows the door to shift side to side on the brackets, which helps match gaps with adjacent doors in a run. Door tilt control lets the top and bottom of the door be set to the face frame or case, which is important for both inset and full overlay applications using this waste pullout. When combined with the left/right and up/down adjustability of the Blum MOVENTO under mount slides, these brackets give the installer multiple ways to dial in door reveal and smooth motion on the SIGBM145-50PF-GR unit across a bank of cabinets.
The Century Signature maple waste pullout uses a solid wood maple box with strong dovetail construction, which keeps the joints tight under the repeated load of two 50 quart grey bins.
The Blum 170 lb MOVENTO soft-close under mount slides carry the pullout from below, providing hidden support, high load capacity, and soft-close action for the waste pullout.
This waste pullout works for inset and full overlay applications, so the same SIGBM145-50PF-GR unit can be used across different cabinet door styles in a project.
The waste pullout uses four adjustable door mounted brackets that offer horizontal adjustment and door tilt control, which helps align the door with adjacent fronts.
The solid maple face frame top is routed to match 34 and 50 quart bins, so the 50 quart grey bins nest to their profiles and stay stable during slide movement.
The maple box is prefinished with a natural finish and a 60 sheen conversion varnish, creating a sealed, smooth surface that supports easy cleaning in the cabinet interior.
The Century Signature 14-7/8 maple waste pullout with two 50 quart grey bins and Blum 170 lb MOVENTO soft-close under mount slides offers a bottom mount trash solution that fits inset and full overlay applications. The solid wood maple box, dovetail construction, routed solid maple face frame top, and four adjustable door mounted brackets give installers a complete waste pullout assembly identified by part number SIGBM145-50PF-GR. Select this Century Components bottom mount trash pullout when a routed maple top, soft-close under mount slides, and adjustable door mounting are required for a cabinet waste station.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CP50QTBN-GR Mfr# 50QTBN-GR | Century Components 50 quart Gray Trash Can, - 50QTBN-GR |