Century Signature 14-7/8" Maple Bottom Mount Waste Pullout with 2-34 Quart Grey Bins Soft-Close, SIGBM145-34PF-GR
Description
Century Signature Bottom Mount Waste Pullout Use
Century Signature bottom mount waste pullout provides a solid maple pullout box that organizes two 34 quart grey bins in a single cabinet, so trash and recycling stay contained while keeping the cabinet interior looking finished and consistent with premium woodworking.
The solid wood maple box with strong dovetail construction creates a rigid housing for the bins, which supports repeated daily slide cycles without the joints loosening under load in a busy kitchen.
The beautifully prefinished natural finish on the maple box and face frame delivers a uniform, smooth surface, which helps the pullout visually match high-end cabinet interiors while reducing exposed raw wood in the waste area.
The solid maple face frame top routed to match the profile of 34 quart bins cradles each bin on all sides, which helps keep the containers from shifting as the pullout opens and closes.
Two 34 quart grey bins provide separated waste capacity in a compact footprint, which helps organize trash and recyclables while fitting common residential cabinet layouts.
Key Construction And Slide Performance Details
- Solid wood maple box with strong dovetail construction forms a rigid, square structure that resists racking, so the pullout tracks smoothly on the slides even with full 34 quart bins.
- Beautifully prefinished natural finish on the maple surfaces seals the wood, which supports a cleaner interior and a finished appearance that aligns with quality cabinet interiors.
- Solid maple face frame top routed to match 34 quart and 50 quart bin profiles locks the bin rims into a shaped opening, helping maintain alignment and reducing wobble during movement.
- Blum 170 lb MOVENTO soft-close under mount slides provide high load capacity and soft-close action, so heavy waste loads move quietly while staying supported along the full extension.
- Left/right and up/down adjustability built into the MOVENTO slides allows fine tuning of the pullout position, which helps align front gaps and motion with neighboring doors and drawers.
- Floor mount brackets on the slide system anchor the pullout to the cabinet floor, creating a stable base that simplifies aligning the pullout box square to the cabinet opening.
Bottom Mount Waste Pullout Installation And Fit
The bottom mount trash pull out soft close design fastens through floor mount brackets, so the pullout references the cabinet bottom for alignment, helping maintain consistent clearances at the face frame or cabinet sides.
Four adjustable door mounted brackets connect the cabinet door to the pullout box, providing horizontal adjustment that lets the door front shift side to side for even reveals against adjacent doors.
The same door mounted brackets also provide door tilt control, so the top and bottom of the door can be angled slightly for flush alignment with neighboring fronts.
The waste pullout works for inset and full overlay applications, which allows the same assembly to be used across common cabinet construction styles within a project.
The routed solid maple face frame top matching the 34 quart bin profile helps locate the front edge of the bins, supporting predictable door clearances and consistent pull action.
How This Trash Pullout Performs In Cabinets
Where This Century Components Pullout Fits Best
The Century Signature 14-7/8 maple waste pullout is part of the Bottom Mount Trash Pullouts class, so it is intended for base cabinets where a floor-mounted system is preferred over side mounting for stability and easier layout on new or retrofit jobs.
The floor mount brackets on the Blum MOVENTO under mount slides tie the pullout directly to the cabinet floor, which suits frameless or face-frame cabinets where installers want the system to track off the bottom panel rather than relying on side panels that may vary.
The ability to work for inset and full overlay applications means the same SIGBM145-34PF-GR waste pullout integrates into different door styles, which is useful when a shop builds both traditional inset kitchens and more contemporary full overlay layouts.
Two grey 34 quart bins create dual-compartment waste storage within the maple box, which fits kitchens where users separate trash and recyclables while keeping the containers hidden behind a standard door front.
The natural finish on the solid maple box and face frame supports use in visible, open-door situations, so cabinet interiors maintain a coordinated appearance when the waste pullout is extended alongside other finished interior components.
Why These Construction Details Improve Results
The solid wood maple box with dovetail construction provides strong corner joints, which helps the pullout resist twisting when one 34 quart bin is loaded heavier than the other, leading to smoother travel on the Blum MOVENTO slides.
The Blum 170 lb MOVENTO soft-close under mount slides with left/right and up/down adjustability give installers control over reveal and height, so the waste front can be set flush with surrounding doors and keep consistent gaps across the run.
The soft-close action on the MOVENTO slides slows the final portion of travel, reducing door slamming, which supports quieter operation in busy kitchens and less impact on the cabinet face frame or case.
The routed solid maple face frame top, shaped to the 34 quart bin profile, grips the bin rims, helping keep the containers square to the pull path so the bins do not rock or shift when the pullout is operated at full extension.
Four adjustable door mounted brackets give multiple points of attachment between the door and the maple box, which spreads loads across a wider area and supports stable operation when the door is used as the handle for pulling the full waste system.
The fact that bins are available with matching lids, sold separately, allows the same pullout structure to support lidded waste management when odor control or covered storage is desired in certain kitchen layouts.
Common Questions About This Waste Pullout
What type of slides are used on this waste pullout?
This waste pullout uses Blum 170 lb MOVENTO soft-close under mount slides, which support high load capacity and smooth soft-close action for heavily loaded 34 quart bins.
How is the Century Signature bottom mount waste pullout installed?
The pullout uses floor mount brackets on the under mount slides and four adjustable door mounted brackets, so it anchors to the cabinet bottom and connects directly to the door front.
Does this SIGBM145-34PF-GR model work with inset and overlay doors?
This SIGBM145-34PF-GR waste pullout works for inset and full overlay applications, so it fits common cabinet door styles using the same pullout assembly.
What capacity and color are the bins in this trash pull out?
The trash pull out is designed for two 34 quart grey bins, providing dual waste compartments in a neutral bin color suited to most cabinet interiors.
How do the adjustable door brackets help during installation?
The four adjustable door mounted brackets provide horizontal adjustment and door tilt control, which allows precise alignment of the waste door with adjacent cabinet fronts.
What material and finish are used for the pullout box?
The pullout box is solid wood maple with strong dovetail construction and a beautifully prefinished natural finish, giving a rigid structure and a clean, finished interior appearance.
Selecting This Pullout For Cabinet Projects
The Century Components trash pull out with solid maple construction, routed face frame top, and Blum 170 lb MOVENTO soft-close under mount slides brings a cabinet-grade waste solution to base cabinets, aligning with projects that value both functional load handling and finished interior appearance.
The SIGBM145-34PF-GR waste pullout with two 34 quart grey bins, floor mount brackets, and adjustable door mounted brackets suits installers and shops wanting a bottom mount trash pullout soft close system that supports inset and full overlay applications in one standardized assembly.
