Century Signature 17-7/8" Maple Bottom Mount Waste Pullout with 2-34 Quart White Bins Soft-Close, SIGBM175-34PF

A Maple-Finished Double-Bin Pullout for a Standard 18-Inch Base Cabinet

This Century Components Signature waste pullout brings two 34 quart bins behind a base cabinet door on a bottom-mount, soft-close carriage finished in prefinished maple.

Key Features

• Two 34 quart white bins included give the carriage enough capacity for trash and recycling side by side.
• Soft-close slides bring the loaded carriage back to closed with a controlled, quiet finish.
• Prefinished maple carriage matches maple cabinet interiors without extra finishing work.
• Bottom-mount design positions the slide hardware beneath the bins for an unobstructed top opening on both containers.
• Door-mount compatible so the carriage travels with the cabinet door on pull.
• 170 pound weight capacity supports two fully loaded bins without stressing the slide system.

Two Bins, One Cabinet Door

Separating trash from recycling inside a single cabinet run is the most common reason to reach for a double-bin pullout. This carriage handles both in a standard 18-inch base cabinet opening, rolling both containers out together so neither bin is tucked behind the other. The bottom-mount hardware stays below the bin bodies, so lids come off and bags lift out without any mechanism in the way. Both white bins are included and seat directly in the carriage, ready to use.

Maple Finish and How It Fits the Cabinet Interior

The carriage is finished in prefinished maple, which matters when the cabinet door or box is maple and the interior is visible during use. The finish is applied at the factory, so no site finishing is needed before installation. At 17-7/8 inches wide and 21-1/2 inches deep, the unit is sized for a typical base cabinet run. The minimum cabinet opening is 18 inches, so measure the clear interior width before ordering to confirm fit. The 19-5/8 inch height works within standard base cabinet floor-to-shelf clearance.

Where This Pullout Works Best

This unit is well suited for a kitchen remodel or new-build cabinet package where the box interior is maple and the cabinet shop or installer wants a finished look throughout, not raw wood behind the door. Cabinet shops building Signature-series kitchens will find the prefinished maple carriage keeps the interior consistent from the face frame back. Homeowners doing a renovation who want a separation between trash and recycling in a single 18-inch base cabinet have a straightforward path here: the double-bin carriage, the included white bins, and a door-mount connection to the existing door pull are all the job needs.

Common Questions

Finished Inside and Out, Ready to Mount

Choose this pullout to keep a trash-and-recycling separation behind one cabinet door in a maple-finish interior, with soft-close slides and both bins already in the box.