Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Century Signature 17-7/8" maple bottom mount waste pullout gives a cabinet a dedicated trash solution using a prefinished unit from Century Components. The unit is part of the Bottom Mount Trash Pullouts class, so it is designed to mount to the cabinet floor and move the bins with the door. Baltic Birch construction forms the pullout frame, which supports the bin platform and resists racking during everyday use. The frame is beautifully prefinished with a natural finish, so it arrives ready to install without separate finishing steps. Two 50 quart white bins sit on the pullout platform, giving a high-capacity setup suited to kitchen or bath cabinet applications. Soft-close action is built into the system, so the pullout closes smoothly against the slides instead of slamming. The product is identified as SIGBM175-50PF, which matches the Century Signature naming for this 17-7/8" bottom mount configuration.
This Century Components bottom mount trash pullout installs to the cabinet floor using its floor mounting brackets, so the load transfers directly into the cabinet base. The 17-7/8" sizing defines the footprint, guiding layout when planning cabinet interior widths and slide placement. Blum Tandem 100 lb slides carry the pullout, so slide positions are set to match that hardware and support the full waste bin load. Four adjustable door mounting brackets tie the cabinet door to the pullout frame, and their horizontal adjustment lets the installer fine-tune side reveals. Door tilt control built into these brackets lets the face be pitched to align with adjacent fronts, reducing the chance of uneven looking gaps across a run. The soft-close function works with the Blum Tandem slides to slow the last portion of travel, which keeps the door from rebounding after closing.
This Century Signature 17-7/8" maple bottom mount waste pullout fits cabinet layouts where a floor-mounted, slide-out trash solution is preferred over a static can. The bottom mount design ties into the cabinet floor with floor mounting brackets, creating a stable base for the Blum Tandem 100 lb slides to operate. Two 50 quart white bins position on the pullout platform, so the available cavity depth and height can be allocated to waste storage rather than multiple smaller containers. The Baltic Birch frame with natural prefinish presents clean wood surfaces inside the cabinet, which aligns well with higher-end kitchen and bath cabinet interiors. Being part of the Bottom Mount Trash Pullouts product class, this unit suits projects that standardize around floor-mounted pullouts rather than side-mounted frames.
The Blum Tandem 100 lb slides on this unit deliver a consistent slide movement that repeats from cabinet to cabinet, which helps when multiple Century Components pullouts are specified in the same job. The 100 lb rating gives the pullout capacity to handle two 50 quart bins loaded with typical trash without overloading the hardware. Four adjustable door mounting brackets are integral to the Signature design and provide horizontal adjustment, so the cabinet door can be shifted slightly left or right to maintain even margins relative to adjacent fronts. The same brackets provide door tilt control, allowing the top or bottom of the door to be brought into plane with surrounding doors and drawers. Baltic Birch construction without edge-banding removes a potential failure line at the edges, because the solid material and natural prefinish operate as one surface, which supports long-term use in a frequently operated cabinet. The soft-close action ties into the Blum Tandem mechanism, so the pullout decelerates at the end of travel, helping the door land quietly against the cabinet face during everyday operation.
The SIGBM175-50PF unit is a Century Signature 17-7/8" maple bottom mount waste pullout with two 50 quart white bins, used as a Bottom Mount Trash Pullout in cabinet installations.
The bottom mount design uses floor mounting brackets to fasten the pullout to the cabinet floor, so weight transfers directly to the base and slide alignment follows the cabinet bottom.
The Blum Tandem 100 lb slides support the waste pullout and guide its movement, so the assembly handles loaded 50 quart bins while maintaining smooth, controlled extension and soft-close action.
The four adjustable door mounting brackets provide horizontal adjustment and door tilt control, allowing the installer to align door reveals and the door plane with surrounding cabinet fronts.
The pullout frame is made from Baltic Birch without edge-banding and is beautifully prefinished with a natural finish, so exposed edges present a uniform wood surface inside the cabinet.
This Century Signature waste pullout is configured with two 50 quart white bins, providing a high-capacity trash or recycling setup within a single cabinet opening.
The Century Signature 17-7/8" maple bottom mount waste pullout with two 50 quart white bins provides a ready-to-install trash solution built from Baltic Birch with a natural prefinish. Blum Tandem 100 lb slides and floor mounting brackets form a robust bottom mount platform, while soft-close action supports quieter cabinet operation. Four adjustable door mounting brackets add horizontal adjustment and tilt control, so the door face can be aligned cleanly with adjacent fronts. For projects calling for a Bottom Mount Trash Pullout from Century Components, this SIGBM175-50PF configuration offers a defined size, bin capacity, and mounting method suited to cabinet-based waste management.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CP50QTBN-WH Mfr# 50QTBN-WH | Century Components 50 quart White Trash Can, - 50QTBN-WH |
