Century Signature cookie tray pull-out is a base cabinet organizer designed to store and arrange cookie trays in a dedicated pull-out. This organizer uses a sloped design of the divider rails to support baking sheets while presenting them at an angle, which helps separate trays for quicker visual identification and access during daily use. It is made from solid maple, so the structure provides a rigid framework to hold metal trays without flexing under normal cabinet loads. The piece is beautifully prefinished with a natural finish, giving the maple surfaces a smooth, sealed feel that is ready to place in a cabinet opening without on-site finishing steps. The angled design on the top rails provides a pleasant look at the front of the cabinet while also opening the upper portion of each slot, which helps when handling shorter trays that might otherwise be hidden behind straight dividers.
This cookie tray pull-out uses Blum soft-close, 100 lb rated, undermount slides, so the hardware is positioned beneath the organizer instead of at the sides, which helps maintain tray width clearance inside the cabinet opening. The slides are specified with floor mount brackets, meaning they anchor at the cabinet floor, so the pull-out references a stable base for movement and alignment. The 11-7/8 inch sizing in the product name identifies the intended cabinet depth range for this Century Signature organizer, guiding layout when planning where it will travel inside a base cabinet. Soft-close action at the end of travel draws the pull-out back to its closed position in a controlled motion, helping protect both the maple organizer and the cabinet front from repeated hard slamming in busy kitchens.
The Century Signature Plywood 11-7/8 inch cookie tray pull-out with soft-close slides, SIGCTP115PF, is part of the base cabinetry organizers and fillers class, so it is intended to operate inside a base cabinet footprint rather than on a wall. As a cookie tray pull-out, it is focused on organizing flat baking sheets rather than general pantry goods, which concentrates storage into narrow slots suited to that task. The floor mount brackets on the Blum undermount slides tie movement directly to the cabinet floor, so the organizer tracks from the base of the compartment and stays aligned with the opening. In a run of kitchen cabinets, this configuration helps dedicate one base position as a baking station component, placing cookie trays upright and ready to grab near ovens or prep areas.
The sloped design of the divider rails does more than change appearance; it presents each cookie tray at a slight angle, which means a user can see and separate individual pieces quickly when loading or unloading. The angled design on top rails provides better access to shorter trays by opening the upper part of each slot, so half-size or specialty sheets remain reachable instead of dropping behind taller items. Solid maple construction pairs with the 100 lb rated Blum undermount slides, so structural rigidity and slide capacity work together to carry a full set of metal trays without binding under typical residential use. The natural prefinished surface on the maple parts removes finishing from the installation workflow, letting the organizer move into service with a sealed, smooth surface that is ready to contact metal trays. Soft-close operation at the end of stroke also contributes to repeatable alignment at the cabinet face, because each cycle brings the pull-out home in a gentle, consistent motion that protects the organizer and cabinet from impact wear.
The cookie tray pull-out is made from solid maple, so the organizer body provides a rigid, wood structure suitable for supporting metal cookie trays in a base cabinet.
The sloped design of the divider rails tilts trays, which separates them visually and physically so individual cookie sheets can be identified and grasped more quickly.
The angled design on top rails opens the upper part of each slot, which provides better access to shorter trays that might otherwise be obscured behind taller pieces.
The Blum soft-close undermount slides are rated at 100 lb, allowing the pull-out to carry multiple cookie trays while maintaining smooth extension and retraction.
The cookie tray pull-out uses undermount slides with floor mount brackets, so the slide hardware runs beneath the organizer and references the cabinet floor.
The 11-7/8 reference in the product name identifies the sizing used for this cookie tray pull-out, which relates to how it is planned into a base cabinet space.
The Century Signature cookie tray pull-out with Blum soft-close, 100 lb rated, undermount slides and floor mount brackets brings a dedicated cookie tray organizer into a base cabinet footprint. Solid maple construction, a natural prefinished surface, and sloped divider rails work together to store trays upright with clear separation. The angled top rail design supports both visual appeal and better access to shorter trays, which suits baking-focused cabinet positions. For projects calling for organized cookie tray storage inside a base cabinet, this SIGCTP115PF pull-out provides a defined, single-purpose solution.
Sold In: 1 Each