
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
X2 bracket set for 20 rollout shelve gives installers a matched set of shelf brackets sized for twenty roll-out shelves, so larger projects can be laid out and planned around a single, consistent hardware set. Century Components branding ties this bracket set to a known manufacturer of shelf standards and brackets, which matters when matching parts across multiple jobs or re-orders. The XBONLY20 part number identifies this exact set for ordering and documentation, helping jobs stay organized from quote through final install. As part of the shelf, closet and garage organization category, this bracket set is aimed at projects where roll-out shelves carry everyday loads in storage or cabinet applications. Being classified as shelf standards and brackets defines its role in the assembly, supporting trays rather than acting as slides or fronts, which keeps expectations clear during design and installation.
The stated fit for X-Series Edge Pilasters focuses this bracket set on those pilaster uprights, letting installers align bracket positions with the pilaster hole pattern for consistent roll-out shelf spacing. Matching design for X-Series Maple Pilasters means the same brackets serve both edge and maple pilaster runs, reducing part variety on mixed-material jobs while keeping support geometry the same. The relationship of 80 brackets to 20 roll-out shelves implies four support points per tray, which shapes how trays are planned along the pilaster runs in a cabinet or closet bay. A 100 lbs weight capacity per supported shelf position frames the kind of contents each roll-out can carry, guiding where heavier items are placed in an organization layout. Testing to 400,000 cycles connects directly to repeated motion over time, giving confidence that bracket engagement with the pilaster stays consistent as shelves are used daily.
The description specifying X-Series Edge Pilasters positions this bracket set in cabinet or storage runs that already rely on that pilaster style, so new roll-out shelves can be added without changing the vertical support system. Matching compatibility with X-Series Maple Pilasters extends the same application into maple-based interiors, which helps designers carry roll-out functionality from garage or closet runs into finished wood cabinetry while holding the same shelf interface. The pack being sized for 20 roll-out shelves allows planners to map an entire bank of trays across several pilaster columns using a single XBONLY20 reference, improving counts when multiple bays are mirrored. Being part of shelf, closet and garage organization keeps the focus on storage environments, where roll-out shelves routinely handle bins, tools or household items that stay within the 100 lbs capacity rating.
The XBONLY20 bracket set, identified as X-Series, ties directly to pilasters from the same family, which simplifies repeating bracket locations across a production run because hole spacing and engagement style are already defined by the system. Having 80 brackets aligned to 20 roll-out shelves standardizes around four supports per shelf, so each tray carries load through a predictable number of contact points, making performance more uniform across the installation. The 100 lbs weight capacity links to each shelf position, allowing consistent assumptions about load when repeating identical cabinet modules in a larger project. Testing to 400,000 cycles is especially relevant for repeatable results because it indicates the bracket engagement has been proven over extensive motion, which supports using the same hardware choice in high-use zones like frequently accessed closets or garage stations. As part of the shelf standards and brackets class, these components maintain the role of vertical support hardware, allowing installers to keep the same assembly logic each time XBONLY20 is specified.
The X2 bracket set for 20 rollout shelve supports twenty roll-out shelves, giving a consistent bracket solution for projects laid out around multiple trays on shared pilaster runs.
The bracket set is designed for X-Series Edge Pilasters and X-Series Maple Pilasters, so it mates with those specific vertical supports in cabinet or storage installations.
The XBONLY20 description specifies 80 brackets for 20 roll-out shelves, aligning bracket count to a layout using four support points per tray position.
The bracket set has a 100 lbs weight capacity, so each supported roll-out shelf position is rated for loads up to that level in typical storage use.
The X-Series bracket set is tested to 400,000 cycles, indicating it has undergone extensive open-and-close cycling to demonstrate performance over repeated motion.
The XBONLY20 part number identifies this specific X-Series bracket set for 20 roll-out shelves, helping estimators, shops and installers reference the same hardware set.
The XBONLY20 X2 bracket set for 20 rollout shelve ties directly to X-Series Edge Pilasters and X-Series Maple Pilasters, making it a focused choice when roll-out shelves are planned around those vertical supports. The combination of 80 brackets sized for 20 roll-out shelves, a 100 lbs weight capacity and testing to 400,000 cycles provides defined performance and layout expectations for storage or cabinet projects using X-Series systems. For work where Century Components shelf standards and brackets are already specified, using this identified bracket set keeps the installation approach consistent across multiple bays and repeat jobs.
Sold In: 1 Package
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CPXPLO21UF-N Mfr# SIGXPLO21UF-N | Century X-Series Maple 1-1/4" Pilaster Standard, SIGXPLO21UF-N | ||||
Sold in: 1 Each | CPXPLO28UF-N Mfr# SIGXPLO28UF-N | Century X-Series Maple 1-1/4" Pilaster Standard, SIGXPLO28UF-N | ||||
Sold in: 1 Each | CPXPLO59UF-N Mfr# SIGXPLO59UF-N | Century X-Series Maple 1-1/4" Pilaster Standard, SIGXPLO59UF-N | ||||
Sold in: 1 Each | CPXPLO21UF-W Mfr# SIGXPLO21UF-W | Century X-Series Maple 2-1/2" Pilaster Standard, SIGXPLO21UF-W | ||||
Sold in: 1 Each | CPXPLO28UF-W Mfr# SIGXPLO28UF-W | Century X-Series Maple 2-1/2" Pilaster Standard, SIGXPLO28UF-W | ||||
Sold in: 500 Each | CPXPLO59UF-W Mfr# SIGXPLO59UF-W | Century X-Series Maple 2-1/2" Pilaster Standard, SIGXPLO59UF-W |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Package | CPXCP1-T-250 Mfr# XCP1-T-250 | X-Series Support Clip for Pilaster |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CPX-JIG Mfr# X-JIG | X-Series Installation Jig for Bracket System |