Century Components Signature Series cutlery drawer is a double tier drawer system designed for maximum organization of silverware and kitchen utensils. The drawer ranges from 10 to 14 individual compartments, so utensils and cutlery can be separated by type for faster grab-and-go access during meal prep. Solid maple construction with tight, strong dovetail joints creates a rigid drawer box that supports daily opening and closing in busy kitchens. The lower tier is dedicated to safe storage of sharp kitchen utensils, which keeps knives and similar tools separated from everyday flatware for a more controlled reach. Two levels of storage effectively provide twice the room for organization within the same cabinet footprint, supporting higher utensil capacity in an existing opening. The system belongs to a wood drawer system category, aligning with kitchens that use wood interiors rather than metal alternatives.
The cutlery drawer uses Blum soft-close 100 lb undermount slides, so the main motion of the drawer closes gently and is supported by slides that are rated for significant load capacity. That rating supports the weight of dense utensils and cutlery without overloading the mechanism under normal kitchen use. Side mount slides with a touch to open feature control the upper tier, so the second level moves on its own slide set and opens with a touch-based action rather than a pull. This drawer is described as door mount, meaning it is designed to work from behind a cabinet door in a typical kitchen layout. Full extension slides allow the drawer to travel completely out of the cabinet, which exposes the rear compartments so utensils at the back remain visible and reachable.
This Century Components Signature Series 14-7/8 inch wide maple cutlery drawer is part of a wood drawer systems class, so it is intended for cabinet interiors where a wood drawer box is preferred. The double tier layout places standard silverware and common utensils across two levels, which suits kitchens that handle a wide range of tools in a limited run of base cabinets. As a door mount cutlery drawer system, it operates behind a hinged door, supporting designs where drawers are not visible on the cabinet face. Full extension undermount slides bring the lower tier completely into view, so even rear compartments remain usable in deeper cabinets. The touch to open upper tier slides forward independently, providing a second organized plane for utensils without increasing cabinet frontage.
The solid maple construction with tight, strong dovetail joints forms a rigid drawer box, so joints resist racking when the drawer is opened to full extension. That structural integrity supports repeatable sliding motion on the Blum soft-close 100 lb undermount slides, allowing the drawer to carry dense cutlery and utensils within the slide rating. The soft-close action moderates closing speed, which helps protect the dovetail joints and maple sides from impact at the cabinet front over time. Side mount slides with a touch to open feature on the upper tier keep the second level moving along its own guided track, so tier alignment remains consistent after many cycles. The natural varnish prefinish seals the maple surfaces, providing a finished feel immediately after installation and supporting smooth travel of utensils across compartment bottoms. By combining double tier organization, robust joints, and rated slide hardware, the DTIER145PF drawer system is built to support daily opening, loading, and sorting in active kitchens.
The Century Components drawer is made from solid maple, which provides a sturdy wood structure and pairs well with wood cabinet interiors.
The drawer is a double tier design with two levels of storage, which effectively doubles utensil organization space in the same cabinet opening.
The drawer ranges from 10 to 14 individual compartments, allowing separation of different utensils and silverware into dedicated sections.
The main drawer runs on Blum soft-close 100 lb undermount slides, providing full extension travel and gentle closing for utensil loads.
The upper tier uses side mount slides with a touch to open feature, so the second level moves forward with a touch instead of a handle pull.
The lower tier of the drawer is intended for safe storage of sharp kitchen utensils, keeping blades on a dedicated level.
The Century Components Signature Series cutlery drawer brings double tier organization, solid maple construction, and Blum soft-close undermount slides together in a single door mount system. For projects using wood drawer systems, its 10 to 14 compartment layout supports a clear place for silverware, sharp utensils, and everyday tools. The natural varnish prefinish means the interior presents a finished appearance as soon as it is installed. When a 14-7/8 inch wide, American made double tier silverware drawer with touch to open upper tier is the right fit for the cabinet run, the DTIER145PF model provides that combination of organization and motion hardware.
Sold In: 1 Each