Formica 5391-99 Graphite Veil laminate is a Grade 86, 0.050 inch thick laminate sheet that provides a metal finish surface for interior vertical work, so you can deliver a metal look in a manageable, fabricator-friendly format. The 48 inch by 120 inch size covers taller panels or grouped components with fewer seams, which helps keep layouts straightforward on larger wall or fixture faces. As a laminate from Formica Corporation, it is designed as part of their laminate and surfacing materials line, giving shops a familiar material class to integrate with existing fabrication methods for casework and interior build-outs.
This Graphite Veil sheet is described as a Deco Metal metal laminate, combining the visual of aluminum or copper in matte, mirror, hammered, or antiqued looks with a laminated construction, so it fits typical laminate processing rather than solid metal work. That combination supports decorative vertical applications where appearance is critical and weight or handling constraints favor laminate.
This Formica 48 inch by 120 inch metal finish laminate is built with a phenolic back, which is designed to improve adhesion to substrates for vertical interior work, so it fits directly into standard laminate bonding workflows. The 0.050 inch Grade 86 construction gives the sheet enough body to stay manageable during handling and pressing, helping installers manipulate larger cuts without the panel folding sharply. Because the laminate is engineered for vertical interior applications, its role is focused on decorative surfacing of walls, fixtures, and casework rather than horizontal or load-bearing use, which streamlines how it is specified during planning.
The Deco Metal metal laminate description indicates matte, mirror, hammered, or antiqued metal aesthetics in an aluminum or copper look, and that finish range helps coordinate vertical surfaces with trim and other design elements in an interior project. Together, the size, thickness, and phenolic back form a laminate that responds predictably during cutting and bonding for fabricators accustomed to Formica laminate procedures.
Formica Graphite Veil metal laminate is engineered for vertical interior applications, so it fits naturally on wall panels, display fixtures, and casework faces where a metal appearance is specified without the handling of solid metal sheet. The 48 inch by 120 inch format covers tall vertical runs or grouped panels with fewer seams, which helps maintain a clean visual line on reception areas, feature walls, and cabinet banks. As a laminate with a metal finish from Formica Corporation, it aligns with woodworking and interior fabrication workflows, letting shops treat the surface as laminate during cutting and bonding while delivering a metallic design statement.
The Deco Metal designation identifies it as a metal laminate using matte, mirror, hammered, or antiqued aluminum or copper sheet over a phenolic back, so you get a recognizable metal face within a laminate-backed construction. That construction allows the sheet to present metal to the room while the back supports adhesion and handling tailored to laminate tools and presses used in woodworking environments.
The Deco Metal phenolic back laminate is specified to prevent creasing, which matters when moving, staging, and positioning 48 inch by 120 inch sheets for layout and bonding, because the backing resists sharp bends that might otherwise mark the metal face. This same phenolic back is described as allowing improved adhesion to substrates, giving the adhesive a compatible surface on the back side and helping the laminate seat evenly across the substrate during pressing for vertical interior use.
The Grade 86, 0.050 inch (1.3 mm) thickness adds stiffness that complements the phenolic back, so the sheet behaves more predictably during trimming and routing around edges and cutouts, supporting cleaner lines on finished installations. Because it is in the Formica HPL category, fabricators working with other Formica laminate and surfacing materials can apply similar shop practices to this Graphite Veil sheet, promoting consistent results across multiple vertical components in the same project.
Formica 5391-99 Graphite Veil laminate is supplied as a 48 inch by 120 inch sheet, which covers tall vertical runs or multiple smaller parts from a single layout.
The Grade 86, 0.050 inch (1.3 mm) thickness provides a comparatively robust laminate layer, giving added body during handling and trimming on vertical interior applications.
The Deco Metal phenolic back is designed to prevent creasing and allow improved adhesion to substrates, supporting smoother handling and bonding on interior vertical panels.
This Formica metal laminate is engineered for vertical interior applications, focusing its use on walls, fixtures, and casework faces rather than horizontal work surfaces.
The Graphite Veil Deco Metal laminate description references matte, mirror, hammered, or antiqued aluminum or copper sheet appearances for design flexibility.
The 48 inch by 120 inch format lets fabricators cut tall or multiple vertical parts from one sheet, which reduces seams and simplifies layout planning.
Formica 5391-99 Graphite Veil laminate, in a 48 inch by 120 inch Grade 86, 0.050 inch sheet, delivers a metal finish surface tailored to vertical interior applications, so it serves wall, fixture, and casework faces needing a metallic statement. The Deco Metal construction with a phenolic back that prevents creasing and allows improved adhesion to substrates supports a controlled fabrication and bonding process across multiple vertical components.
For interior projects that call for matte, mirror, hammered, or antiqued aluminum or copper visuals within a laminate workflow, this Formica Graphite Veil sheet offers a defined size, thickness, and backing combination ready to integrate into shop layouts and vertical installations.
Sold In: 1 Sheet