Century Components Galaxy charging drawer keeps devices off the countertop by providing a secure, out-of-sight charging location, which frees working space while keeping electronics organized inside the cabinet. This wood drawer system is built around a solid maple dovetailed drawer box with a 60 sheen natural conversion finish, giving the interior a smooth, finished surface that stands up to regular drawer use. The drawer is designed for use in framed cabinet application, so it fits into traditional kitchen and bath cabinet construction where a concealed charging area is needed. An ETL listed 15 amp Docking Drawer outlet that meets UL962a standards is integrated into the system, so the charging function is built to recognized safety benchmarks for this type of application. AC, USB-A and USB-C connections are provided in the outlet, allowing a range of common devices to be powered or charged inside the drawer.
The Galaxy Series 16-1/2 inch charging drawer is identified for use in framed cabinet application, which aligns with common face-frame kitchen and bath layouts where a pull-out charging station is planned. Blum TANDEM undermount slides are used on this drawer, so the slide hardware sits underneath instead of on the sides, leaving the maple box sides clear for full interior access during installation and use. These undermount slides are full extension, which lets the drawer travel completely out to expose the leather covered insert and maple dividers so devices and cords can be reached without working inside the cabinet opening. The drawer dimensions of 16-1/2 inch by 21-1/2 inch by 4-7/16 inch define the overall size for fitting into a cabinet opening, which helps align the drawer system with the intended framed cabinet layout in a project.
The Century Components Galaxy charging drawer is part of a wood drawer systems category, so it is built as a complete drawer box with integrated charging rather than a loose outlet. The specified use in framed cabinet application makes it suited to kitchens, baths, or other face-frame cabinet runs where a dedicated charging point is needed inside a cabinet bay. With overall dimensions of 16-1/2 inch by 21-1/2 inch by 4-7/16 inch, the drawer occupies a defined footprint, which supports planning cabinet interior space so the charging station aligns with surrounding drawers and doors. The ETL listed 15 amp Docking Drawer outlet that meets UL962a standards is engineered into the drawer, so a power-ready interior can be planned as part of the cabinet design rather than treated as an add-on later. AC, USB-A and USB-C connections allow a mix of current device plug styles to be accommodated in the same framed cabinet location.
The solid maple dovetailed drawer box used in this Galaxy Series unit provides a rigid, square structure, which promotes consistent slide performance when paired with the Blum TANDEM undermount slides. Those full extension slides carry the drawer fully out of the face frame, which exposes the genuine leather covered insert and solid maple dividers so phones and tablets can be positioned and moved without working past the cabinet face. The leather covered insert creates a softer resting surface under devices, which helps them stay in place against the maple dividers when the drawer is moved in and out. Access holes in the maple dividers guide charging cords through fixed points, which supports repeatable cord routing so cables do not interfere with the drawer travel across repeated charging cycles. The 60 sheen natural conversion finish on the maple surfaces gives the interior a smooth, sealed feel, which helps the drawer wipe down easily after regular handling around electronic devices.
The Century Components Galaxy charging drawer is specified for use in framed cabinet application, which aligns with common face-frame kitchen and bath cabinet layouts.
The Galaxy charging drawer has dimensions of 16-1/2 inch by 21-1/2 inch by 4-7/16 inch, which defines the footprint when planning cabinet openings and interior clearances.
The charging drawer uses an ETL listed 15 amp Docking Drawer outlet that meets UL962a standards, which provides a power source suited to integrated in-drawer charging applications.
The integrated Docking Drawer outlet provides AC, USB-A and USB-C connections, allowing different device plug types to be charged in the same drawer space.
The Galaxy charging drawer uses Blum TANDEM undermount slides with full extension, which carry the drawer fully out and keep the slide hardware concealed underneath.
The drawer interior uses a solid maple dovetailed drawer box with a 60 sheen natural conversion finish, and the insert is genuine leather covered with solid maple dividers.
The Century Components Galaxy charging drawer with Blum TANDEM full extension undermount slides, ETL listed 15 amp Docking Drawer outlet, and solid maple dovetailed box provides an integrated in-drawer charging solution sized at 16-1/2 inch by 21-1/2 inch by 4-7/16 inch for framed cabinet application. The combination of AC, USB-A and USB-C connections, genuine leather covered insert, and maple dividers with access holes brings power distribution and device organization into a defined drawer space. When a project calls for a wood drawer system that keeps charging off the countertop and inside a framed cabinet bay, this Galaxy Series unit offers a ready-to-use configuration built around maple construction and an in-drawer outlet.
Sold In: 1 Each