Riptide Drawer Sides Clear Rubberwood 5/8” Thick, 20.5” Length - 1512 Each, 01-0000000441

Riptide Drawer Sides For Consistent Drawer Construction

Riptide drawer sides give you clear rubberwood drawer side blanks designed for building uniform drawers across a project. The drawer side, 0.625 x 4 x 20.5, provides a 5/8 inch thick profile that supports straightforward sizing, joining, and assembly when laying out standard drawers. Each side is made of rubberwood, so you work with a stable, machinable material while cutting joinery or machining notches. The UV finished surface arrives with a cured coating on the rubberwood, so drawer interiors present a finished look as soon as they are assembled. Because these parts are designated as drawer side blanks within drawer construction systems, they fit naturally into production workflows where you want pre-sized stock for repeatable drawer box runs. Sold in pallet quantities only, this format serves shops that need large runs of consistent drawer parts from the same material batch.

Key Drawer Side Details That Support Production

• The 0.625 inch thickness creates a 5/8 inch drawer side, which helps maintain a substantial side wall that machines cleanly for common drawer joinery while keeping material use efficient.
• The 4 inch height gives a defined drawer side dimension, which simplifies setting stops and fence positions when cutting bottoms, notching, or running grooves along the full length.
• The 20.5 inch length sets a repeatable drawer depth starting point, which reduces layout time when producing banks of drawers that share a common depth requirement.
• The rubberwood construction provides a wood substrate, which supports typical woodworking operations such as ripping, crosscutting, and edge preparation during drawer box assembly.
• The UV finished description indicates the rubberwood surface is pre-finished, which eliminates a separate finishing pass on the drawer sides and helps keep interiors looking consistent across the job.
• The pallet-quantity format aligns with higher volume needs, which supports shops running production batches where consistent drawer sides from one run help maintain uniform fit and appearance.

Drawer Side Dimensions That Guide Installation Work

The drawer side, 0.625 x 4 x 20.5, gives you clear numbers to plan your drawer layout. The 0.625 inch thickness defines the side wall dimension for calculating overall drawer width relative to your chosen slide system. A 4 inch high side sets the profile of the drawer wall, shaping how tall the drawer box will stand inside the cabinet opening. With the 20.5 inch length, you start with a fixed depth blank that you can keep as is or trim to match specific cabinet dimensions and slide lengths. The UV finished rubberwood surface stays part of the piece during machining, so groove cuts, dadoes, or end trimming still present a finished interior face after assembly.

Using Riptide Drawer Blanks In Shop Workflow

Where These Rubberwood Drawer Sides Fit Best

These drawer side blanks sit within drawer construction systems and drawer blanks as their product class and category, so they are aimed directly at drawer box building tasks in woodworking shops. The clear rubberwood material is suited to interior drawer components where a clean wood appearance is preferred on visible sides. With each piece sized at 0.625 x 4 x 20.5, these sides work well in cabinet, furniture, or fixture projects that benefit from a moderate drawer depth and a 4 inch wall height. The UV finished surface means the interior face of the drawer side is already coated, so completed drawers present a uniform interior right off the bench.

Why These Drawer Side Details Support Repeatable Results

The 0.625 inch, or 5/8 inch, thick profile helps maintain consistent joinery strength from drawer to drawer because all sides share the same thickness at dovetails, dowels, or other joints. Having a defined 4 inch height allows you to standardize jig settings and fence positions when cutting bottoms or routing grooves, which reduces setup changes across a production run. The fixed 20.5 inch length gives a predictable starting depth, so you can align drawer design with slide lengths and cabinet depths by working from a common baseline blank. The UV finished rubberwood surface reduces finishing steps on the drawer interiors, helping keep workflows focused on machining and assembly rather than separate interior coating passes. As drawer side blanks within drawer construction systems, these parts are structured to slot into repeatable processes where uniform dimensions and appearance matter from the first drawer to the last.

Common Questions About These Rubberwood Drawer Sides

Select Riptide Drawer Sides For Scaled Drawer Runs

Choose these Riptide drawer sides when a consistent, clear rubberwood drawer side blank fits your workflow. The drawer side, 0.625 x 4 x 20.5, gives fixed dimensions that support efficient planning and machining. With rubberwood UV finished surfaces and pallet quantities only, this option suits production settings where uniform drawer box components from Wurth Baer Supply align with ongoing cabinet and furniture work.