Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Senco 16 gauge finish nail defines this Senco Products, Inc. brad as a finishing fastener designed for trim and cabinet fastening where a small, controllable nail profile matters for a cleaner finished surface. The 1-1/4 in length gives each nail enough bite for common light woodworking joints where material thickness is moderate and a shorter fastener helps reduce breakthrough on the back side. The brad nail format focuses the fastener profile into a slim shank that helps the nail drive into wood with less displacement, which supports smoother surfaces ready for filling and finishing. The chisel tip at the point is shaped to enter the workpiece with a cutting action that directs the nail path more predictably, which matters when driving near edges or profiles that need to stay intact. The fastener sits within the Finish Nails category, aligning it with trim, casing, and other visible wood applications.
The 16 gauge format defines how this Senco finishing brad nail fits into job planning, providing a known shank thickness that coordinates with common finishing nailers built for that gauge. The 1-1/4 in length sets expectations for how the nail behaves in typical trim and cabinet material thicknesses, which helps match fastener depth to the work without over-penetration. As a finishing brad nail, the fastener is intended for tasks where the nail head and shank need to remain relatively discreet on the surface, allowing fill and finishing steps to proceed with minimal surface disruption. The chisel tip supports entry into wood fibers with a slicing action that works to maintain a straighter travel path, which is important when fastening close to edges, corners, or decorative profiles that need to remain sharp.
This Senco 16 Gauge x 1-1/4 in Long Finishing Brad Nail Chisel Tip, 2000/Box, M001002 is positioned for woodworking and trim tasks where a finishing nail is appropriate. The 16 gauge size aligns with projects that benefit from a balance between visible footprint and holding strength, such as attaching trim components or light structural elements within cabinetry where surfaces remain exposed. The 1-1/4 in length supports applications involving moderate material thickness, because the nail is sized to reach through typical trim or face frames without excessive projection beyond the backside. The chisel tip style plays a role when nails are driven along grain or near detail work, as the point form is designed to cut into fibers in a guided manner that works against wandering. Being part of the Nails product class and specifically categorized as Finish Nails ties its use to finish carpentry steps rather than heavy framing.
The consistent 16 gauge sizing across this Senco finishing brad nail line gives installers a predictable shank dimension to work with when dialing in fastening patterns and spacing. The known 1-1/4 in length helps set up depth expectations during driving, which contributes to a repeatable result from one fastener to the next as nails are sunk into comparable material stacks. The brad nail form factor provides a slender profile that enters the workpiece with reduced displacement, supporting even seating when nails are driven across long runs of casing or trim. The chisel tip on each nail is shaped to favor a straighter trajectory as it advances, which becomes important when many fasteners are placed close to edges and need to hold without breaking through visible faces. The clear M001002 designation on specifications connects the on-site fastener to Senco Products, Inc. documentation and ordering, aiding consistency from initial installation through later matching work.
This Senco 16 gauge finish nail is categorized as a finishing brad nail, which suits trim, cabinetry, and other visible wood applications where a smaller fastener footprint is preferred.
The 1-1/4 in length allows the nail to penetrate typical trim and cabinet stock without excessive overrun, which supports fastening in moderate thickness materials.
The chisel tip on this Senco finishing brad nail is shaped to cut into wood fibers in a guided way, promoting a straighter driving path near edges and profiles.
This fastener is identified as a finishing brad nail within the Finish Nails category and Nails product class, positioning it for finish carpentry rather than heavy framing.
The 16 gauge size defines shank thickness, giving a balance of holding power and smaller surface holes that supports visible finish work and controlled fastening patterns.
The M001002 manufacturer part number uniquely identifies this specific Senco 16 gauge x 1-1/4 in finishing brad nail, helping match fasteners across projects and orders.
The Senco 16 Gauge x 1-1/4 in Long Finishing Brad Nail Chisel Tip, 2000/Box, M001002 ties gauge, length, and point style into one defined fastener that is suited to visible wood applications. Using a nail with a known 16 gauge profile and 1-1/4 in length helps keep fastening consistent when attaching trim or cabinet components in moderate thickness stock. The finishing brad nail design and chisel tip work together to support cleaner entry and a controlled nail path, which is important when appearance and alignment carry through to the final result. Selecting this Senco M001002 fastener through Wurth Baer Supply connects trim and cabinet work to a clearly specified finish nail that can be repeated from job to job.
Sold In: 1 Box