Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Studio 917 Heritage pull is a traditional arch-profile cabinet pull mounted on 5-1/16 inch (128 mm) centers, suited to base drawers, full-height cabinet doors, and furniture-style panels where a smaller pull would look proportionally light.
The 5-1/16 inch center-to-center is the step up from the 96 mm pull that dominates standard upper cabinets, and it earns its place on fronts where a narrower hole pattern would leave the pull looking crowded or thin. A wide base drawer, a tall pantry door, or a furniture-style island panel all benefit from a pull drilled to this spacing: the hardware fills the front in better proportion and the grip lands where the hand naturally finds it. For anyone replacing existing hardware drilled to 128 mm centers, this pull drops onto those holes without touching the door.
The pull is cast in zinc and finished in Brushed Satin Nickel. The brushed surface produces a soft, even sheen rather than a mirror reflection, which means it reads consistently under different light conditions and shows everyday marks less readily than a polished finish does. Satin Nickel sits comfortably in the silver-tone family without the cool edge of chrome, giving it useful range across both warm and neutral cabinetry programs. The arch form reinforces that character: the gentle rise of the profile adds a measure of traditional weight without turning ornate.
This pull suits a traditional or transitional kitchen, bath, or built-in where the hardware program is silver-toned and the cabinetry runs to larger-scale fronts. Cabinet shops laying out a full kitchen with a mix of drawer widths will find the 128 mm spacing essential for the base run, paired with pulls or knobs in a shorter center-to-center for upper doors. Designers specifying the Heritage collection can pull companion pieces from the same series to keep knobs, pulls, and other hardware in one coordinated design language. Homeowners replacing a bank of drawers drilled to this spacing get a clean swap with no drilling required.
Drill at 5-1/16 inches (128 mm) center-to-center. The overall length of the pull is 6-3/8 inches, which is larger than the hole spacing, so do not use the overall length as your drilling reference.
An arch pull is symmetrical across its width, but like most arch pulls it has a defined orientation: the arch rises from the two posts toward the center of the grip. Install it with the arch facing outward from the door face.
The finish is Brushed Satin Nickel within the Heritage series. Satin nickel finishes vary between manufacturers, so the closest coordination will always be within the same Heritage collection rather than across brands.
Yes. At this center-to-center and overall length it is proportioned for both wider drawer fronts and taller cabinet doors.
Choose this pull when the 128 mm hole pattern and a brushed silver-tone arch are what the front calls for, and the hardware should carry traditional proportion without competing with the cabinetry.
Sold In: 1 Each