Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Studio 917 Heritage pull is a traditional arch-profile cabinet pull that mounts on 5-1/16 inch (128 mm) centers, a spacing sized for wide base drawers, full-height pantry doors, and cabinet fronts where a smaller pull would look lost.
The 5-1/16 inch center-to-center spacing is the step up from the common 3-3/4 inch pull, and it earns its place on the larger surfaces in a kitchen or bath: base cabinet drawers spanning two door widths, pantry fronts, furniture-height vanity doors, and appliance-adjacent panels where a narrow pull looks undersized. On those fronts the 6-3/8 inch overall length fills the visual field without overcrowding it, and the arch profile adds height to the grip without adding visual bulk. If the existing holes in a replacement project are drilled at 128 mm, this pull drops into place without new drilling.
The pull is cast in zinc and finished in Matte Black. The arch section is 3/4 inch wide across the grip face, which is broad enough to feel substantial but not so wide that it becomes a dominant feature on the door. Matte Black is a flat, light-absorbing finish: it holds its tone under kitchen lighting rather than shifting with the angle of the light, and it reads consistently against both light and dark painted fronts. The low sheen also makes it more forgiving of handling than a polished surface, since it does not show contact in the same way a mirror finish does.
This pull suits a traditional or transitional kitchen, bath, or built-in where the hardware program is black and the cabinetry runs to larger fronts. Designers specifying a full kitchen frequently reach for 128 mm centers on the base drawers while running a shorter pull or a knob on upper doors, and the Heritage series supports that mix because the companion pieces share the same arch profile and finish. It also works well on furniture-style vanities and media cabinet drawers where traditional arch hardware fits the design language of the piece.
Center-to-center is 5-1/16 inches (128 mm), the distance between your two mounting holes, and is the drilling dimension. Overall length is 6-3/8 inches (162 mm), the full end-to-end size of the pull. Match the center-to-center to your existing holes or drill layout, not the overall length.
An arch pull rises from its two mounting posts to a peak at the center. It is designed to be installed with the arch facing outward from the door, and is not reversible to a flat bar orientation.
The Heritage collection includes companion hardware in the same design language and finish, which is the practical way to run pulls on drawers and knobs on doors within one project.
The projection is 1-3/16 inches (30 mm), which is the distance from the door face to the back of the grip.
When a wide drawer or a tall door calls for hardware with real presence, the Heritage arch pull at 128 mm centers delivers the proportion and the finish without overstating either.
Sold In: 1 Each