Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Rinco-Matic SYMA32 Inglete32 profile handle is a continuous handleless grip section supplied in a 105-1/8 inch stock length and finished in Matte Silver. It installs along the face of a cabinet front to form a recessed opening the hand reaches into, eliminating visible hardware across the run.
A Matte Silver finish reads as a cool, neutral tone against white, light gray, and pale stone cabinet fronts, which is why it suits contemporary and Scandinavian-influenced kitchens where warm brass or gold hardware would create contrast rather than continuity. The profile sits at the top edge of a door or drawer front and forms the grip by its cross-section alone. There are no posts, no visible screws on the grip face, and no separate handle piece to break the line of the elevation. For a fabricator building a full handleless run, one profile length covers the width of the cabinet and is cut to fit.
Matte Silver is a flat, non-reflective finish with a cool undertone. It sits apart from brushed or polished silver finishes in that it does not pick up reflections from the room, which keeps the shadow gap effect that a handleless profile creates from being interrupted by a bright strip. The Inglete32 geometry produces an angled profile, distinct from a flat section, and that angle affects how the recess reads in the elevation and how the hand approaches the grip. The profile is a stock section: it arrives at 105-1/8 inches and is cut to the cabinet run by the fabricator. End caps, corner pieces, and clips for the SYMA32 system are separate items ordered by their own references and are not included with the profile.
Cabinet shops building handleless kitchens on the Rinco-Matic SYMA32 system specify this profile where the finish scheme calls for a cool silver rather than a warm gold, a matte black, or a white. Designers who want the grip line to disappear into a pale or gray-toned elevation rather than read as a distinct metallic element typically reach for Matte Silver. At just over eight and a half feet per section it is a long item, so the receiving and handling logistics are worth accounting for in the shop. Each front in the run typically uses one profile length, cut to the front width.
No. Matte Silver is a flat, non-reflective finish. Polished and brushed silver finishes carry sheen and reflection. The three are visually distinct on the installed elevation.
No. End caps, clips, and corners for the SYMA32 system are separate items with their own order references. The profile ships as a single section only.
The profile installs at the top edge of a door or drawer front. Whether it suits a specific application depends on the front dimensions and the system layout, not on a door-versus-drawer distinction in the profile itself.
No. Rinco-Matic SYMA32 components are specific to that system. Schwinn accessories are not interchangeable with Rinco-Matic profiles.
Specify this profile where the elevation calls for a grip line that recedes into the cabinet face rather than announcing itself, and pair it with the SYMA32 system caps and corners ordered separately to finish the run.
Sold In: 1 Each