Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Rinco-Matic SYMA2 Inglete profile handle is a continuous grip profile for handleless cabinetry, supplied in a 105-1/8 inch stock length and finished in Anthracite.
Finish is the deciding factor when every other specification is identical across a profile family. Anthracite sits in a middle register that pure Matte Black does not occupy: it reads as dark gray in cooler light and as a warm charcoal in warmer light, which means it works equally well against white, warm-wood, and two-tone cabinet programs where a stark black line would feel too hard. The angled Inglete geometry of the SYMA2 creates a shadow gap that deepens with Anthracite, making the grip line visible without drawing the eye to hardware.
At 105-1/8 inches the profile ships as a long piece rather than a packaged item, which is a receiving and staging consideration for any shop or site. The length is supplied as a standard stock to be cut by the fabricator to the width of each cabinet run. No cutting method, allowance, or tooling guidance is specified; that is the installer's scope. A run of wall cabinets at 1200 mm wide will leave a significant offcut, so calculating total linear footage before ordering is the standard practice.
This profile suits a handleless kitchen, built-in, or bath program where Anthracite is the hardware finish or a coordinating accent finish in the palette. It is the right choice when a dark neutral is needed but the contrast of Matte Black feels too sharp against the door fronts selected. Cabinet shops specifying a contemporary or transitional handleless program with warm-toned fronts, greige laminates, or stained wood will find Anthracite a more useful match than a cool or flat black. End caps, corners, and connectors for the SYMA system are separate items, specific to the profile series, and are ordered alongside.
Anthracite is a dark charcoal-gray tone rather than a pure flat black. In a cabinet elevation it reads as a softer dark line, which integrates more readily with warm or mid-tone door finishes.
The SYMA range shares a system family, but components are size-specific. Do not assume that caps or corners from a different SYMA size will fit this profile.
No. End caps, corners, and connectors are separate items ordered for the SYMA series specifically.
105-1/8 inches (2670 mm) as a stock length, cut to the run by the fabricator.
Specify this profile where a handleless grip line needs to disappear into the elevation rather than contrast with it, and where Anthracite is the finish that makes that possible.
Sold In: 1 Each