Riepe Cleaning Agent 30 Liters is a liquid system used to spray Cleaning Agent LP163/93 on the top and bottom surface of the board edge as well as the edgeband, so installers can clean these areas directly in the edgebanding process. The product is applied where loose glue residue and release agent collect, allowing the chemical action to break this bond so the following buffing step removes contamination from the edge. By directing the agent at the board edge and banding, the operator supports a workflow where contamination is treated while the part is still in the machine. The 30 liter quantity supports extended use in shop and safety supply applications where regular board edge processing is required.
The cleaning agent is applied at the machine infeed side, so release agent and glue residue are treated before they harden further along the machine. After application, the subsequent buffing step removes the treated glue and residue, turning a single pass into both cleaning and surface finishing. The process cools the glue joint and edge banding, which stabilizes the material during mechanical contact from buffing wheels. Glue residue no longer adheres to the buffing wheels when LP163/93 is used, so the wheels remain cleaner during repeated passes and maintain more consistent contact at the edge.
Riepe Cleaning Agent LP163/93 is used on the top and bottom surface of the board edge as well as the edgeband, so it works in the section of the edgebander where finished edges are formed. At the machine infeed side, release agent and glue residue sit near the glue joint, and spraying LP163/93 at this point lets the cleaner reach the joint while adhesive is still workable. The liquid then carries through to the buffing station, where treated contamination is removed as the buffing discs contact the workpiece edge. Because the glue joint and edge banding are cooled as the cleaner is applied, the material arrives at buffing in a more temperature-stable state, supporting predictable cutting and polishing of the edge banding radius.
The edge banding radius is wet buffed with Cleaning Agent LP163/93, so the radius is processed under lubrication that reduces heating of the thermoplastic material. As a consequence, heating of the thermoplastic material is notably reduced and smearing of the plastic is prevented, which keeps the profile crisp along the edge contour. Moreover, the radius is polished to match the surface sheen, so the shaped edge visually aligns with the adjoining board surfaces. Glue residue no longer adheres to the buffing wheels during this process, which keeps the wheels free-cutting and reduces transfer of contamination back onto finished parts. The result is described as an absolutely clean board edge, reflecting how the combined spraying, cooling, and wet buffing sequence produces a consistently finished edge along the length of the workpiece.
Riepe Cleaning Agent 30 Liters sprays LP163/93 onto the board edge and edgeband, dissolving release agent and loose glue so subsequent buffing clears contamination from the edge surfaces.
The cleaning agent is applied at the machine infeed side to the top and bottom board edge and edgeband, so it treats release agent and glue residue before they reach the buffing station.
The cleaning agent cools the glue joint and edge banding as it is sprayed, which reduces heat buildup during buffing and helps stabilize the thermoplastic edge material.
The cleaning agent loosens glue emerging from the joint and reduces heat, so buffing removes residue without dragging adhesive across the surface, avoiding smearing.
The edge banding radius is wet buffed with LP163/93, which reduces heating, prevents plastic smearing, and polishes the radius to match the surrounding surface sheen.
With LP163/93, glue residue is chemically treated and removed during buffing, so it no longer adheres to the buffing wheels and they stay cleaner in operation.
Riepe Cleaning Agent LP163/93 in a 30 liter size supports edgebanding work where the top and bottom board edge and the edgeband need cleaning, cooling, and wet buffing in one line. The agent treats release agent and loose glue residue at the machine infeed side, so the following buffing operation clears contamination and polishes the edge banding radius to match surface sheen. For shops focusing on absolutely clean board edges on processed panels, this cleaning liquid provides the defined process described for use with Riepe LP163/93 systems.
Sold In: 1 Each