Adjustable Equipment Leg with Plate 4" - 5-3/4"

Adjustable Equipment Leg With Plate For Stable Support

Adjustable Equipment Leg with Plate 4"-5.75" is an equipment and furniture leg that supports work surfaces and tables where height and stability matter. The stainless steel tubing is 16 GA #300 series with a #4 satin finish, which provides a solid metal structure with a clean, professional appearance suited to commercial environments. The integral foot is a hex shape, which helps grip tools during adjustment and gives a defined contact point to transfer load to the floor. The leg height adjusts from 4 inches to 5.75 inches, so installers can fine-tune working height or compensate for uneven floors within that range. Static load ratings are up to 2000 lb, allowing this component to be used under heavy equipment or furniture where strong vertical support is required. The product is part of the equipment and furniture legs class, so it fits directly into projects that need rigid, height-adjustable support.

Key Stainless Leg Details That Help On Site

• The stainless steel tubing is 16 GA #300 series, giving a robust wall thickness that resists deformation under rated loads, which matters when supporting heavy work surfaces or tables over long periods.
• The #4 satin finish on the stainless steel creates a smooth, brushed appearance that helps the leg visually blend with typical commercial stainless work surfaces while being straightforward to wipe down.
• The adjustable range from 4 inches to 5.75 inches lets installers dial in working height within that window, which is useful when aligning multiple legs under a shared top or matching existing equipment height.
• The integral hex-shaped foot provides flat faces that accept a wrench or similar tool, which simplifies precise height adjustment when the leg is under load or hard to reach by hand.
• Static load ratings up to 2000 lb indicate the leg is designed for substantial vertical loads, which aids planning when positioning heavy equipment or dense storage on the supported surface.
• The presence of a mounting plate in the design gives a defined interface for securing the leg to the supporting structure, which helps achieve repeatable, square alignment at each mounting point.

Mounting And Height Adjustment For This Cabinet Leg

This Kason Mid-America equipment leg uses a mounting plate as the connection point to the cabinet, table, or equipment base, so the load transfers through a broad, flat interface for stability. The leg height spans from 4 inches to 5.75 inches, giving installers 1.75 inches of vertical adjustment to level surfaces when floors are uneven or when matching adjacent equipment. The integral hex-shaped foot accepts a wrench on its flat faces, which allows controlled rotation for fine height changes, even when the leg is partially loaded. The static load rating up to 2000 lb means the mounting and adjustment features work within a load envelope suited to heavy-duty installations where deflection needs to be minimized.

How This Stainless Equipment Leg Performs In Use

Where This Adjustable Equipment Leg Is Typically Used

The Kason Mid-America Adjustable Equipment Leg with Plate 4"-5.75" sits in the equipment and furniture legs category, so it serves under work surfaces, tables, and similar structures that need fixed vertical support with modest height flexibility. The 4 inch to 5.75 inch adjustment range positions it for low-clearance applications, such as shorter work tables or cabinets where limited plinth height is required. Because the stainless steel tubing is 16 GA #300 series with #4 satin finish, the leg suits environments where both corrosion resistance and a professional stainless look are important, such as commercial woodworking shops or facilities using stainless tops. The mounting plate provides a distinct connection footprint at the top of the leg, which helps align multiple legs consistently under a shared surface so the load is distributed predictably. The integral hex-shaped foot defines the ground contact area and creates an adjustment point that can be accessed with a wrench from the side, which is helpful when the leg is near walls or adjacent furniture.

Why The Load Rating And Construction Support Repeatable Results

The static load rating up to 2000 lb shows this leg is intended for heavy-duty vertical loads, so one or more legs can be planned into layouts that support dense workpieces or machinery within that rating. The stainless steel tubing specified as 16 GA #300 series provides both wall thickness and alloy performance that help resist bending under static load, which maintains consistent working height. The #4 satin finish is a controlled mechanical finish, so each leg presents a uniform surface that helps finished installations look consistent when multiple legs are visible. The adjustable range from 4 inches to 5.75 inches allows repeated setups at known heights across projects using the same model number KM61752HF40F5, which supports standardization in shop layouts. The integral hex foot lets installers return to the same height settings by counting wrench flats during adjustment, which can reduce trial-and-error when aligning replacement legs or matching existing equipment heights. Together, the defined mounting plate, controlled finish, gauge, and load rating create a component that behaves predictably when deployed across multiple installations.

Common Questions About This Adjustable Equipment Leg

Choose This Stainless Leg For Heavy-Duty Support

The Adjustable Equipment Leg with Plate 4"-5.75" from Kason Mid-America combines 16 GA #300 series stainless tubing, a #4 satin finish, and a static load rating up to 2000 lb to support demanding work surfaces. The 4 inch to 5.75 inch height range and integral hex-shaped foot give installers practical adjustment capability in tight spaces. With its defined mounting plate interface and identifiable part number KM61752HF40F5, this equipment and furniture leg fits projects that call for consistent, repeatable support components across multiple installations.