
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sutherland bench bracket is an angle bracket designed to support benches while staying virtually invisible under the seating surface, which helps create a clean, uncluttered appearance in finished spaces. This Federal Brace Sutherland Bench Bracket Stainless 7"H x 14"L, 30412 uses a low profile gusset that adds structural strength without drawing attention, so the focus stays on the bench design rather than the hardware. The bracket is made from stainless steel, giving it suitability for both indoor and outdoor use where moisture or temperature changes are common. A material thickness of 0.25" gives the bracket a solid cross-section, which contributes to its stated carry capacity. Holes sized at 0.26" and countersunk provide a flat bearing surface over the fastener heads, which helps the bench material sit tight to the bracket and maintain a flush, finished look.
The Sutherland bench support can be installed over tile when the proper tools are used, which lets installers retrofit support to finished tiled walls without demolition. It can also be tiled around when installed prior to tile work, allowing the bracket to be integrated into new construction for a seamless finished look. For 10" and 14" Sutherland Bench Brackets, spacing no greater than 30" apart in an installation and fastening into studs provides a 375 to 500 pound carry capacity, which directly affects how many brackets are laid out under a typical bench run. For 16" brackets, spacing no greater than 18" apart into studs supports a 375 pound carry capacity, so layouts for deeper benches can be planned around this closer spacing to maintain the specified load rating.
The Sutherland Bench Bracket by Federal Brace is classified as a bench support bracket, so it is intended for use wherever a fixed bench needs structural backing along a wall or similar support surface. This 14" length by 7" height configuration fits bench depths where the bracket length is within 4" of the bench depth, since the product guidance is to select a size that is within 4" of the depth of the bench for maximum support. That selection approach helps keep the load path well under the bench seat rather than leaving large overhangs, which is useful in built-in seating, mudroom benches, or similar installations. The availability of sizes 10x5, 14x7, and 16x8 in the Sutherland line provides options for different bench depths, letting installers match bracket geometry to the specific bench dimension while maintaining similar visual style across a project.
The inwardly sloped gusset on the Sutherland Bench Bracket provides strength while maintaining a sleek look, which matters when multiple brackets are installed in a row and visible lines under the bench need to stay consistent. Stainless steel as the specified finish offers a uniform appearance and corrosion resistance, which supports repeatable results between indoor and outdoor benches using the same part number 30412. The defined spacing rules - no greater than 30" apart into studs for 10" and 14" brackets at 375 to 500 pounds each depending on cantilever, and no greater than 18" apart into studs for 16" brackets at 375 pounds - give installers clear layout parameters so load capacity remains predictable from one job to the next. The combination of countersunk 0.26" holes and a quarter-inch thick section also contributes to consistent seating and alignment of bench materials along the run, which helps reduce rework over long bench installations.
The Sutherland Bench Bracket is an angle bracket with a low profile gusset, so it supports bench loads while staying tucked under the seat and preserving a clean, minimal look.
The Sutherland bench support is specified for use indoors and outdoors, which allows the same stainless bracket style to be applied in both interior seating and exterior bench projects.
The Sutherland Bench Bracket line is intended to be selected so the bracket size is within 4" of the bench depth, helping keep support directly under the seat and limiting unsupported overhang.
For 10" and 14" Sutherland Bench Brackets, spacing no greater than 30" apart into studs provides a 375 to 500 pound carry capacity, guiding layout for wall-supported benches.
The 16" Sutherland Bench Brackets have a 375 pound carry capacity when spaced no greater than 18" apart into studs, which informs bracket count for deeper bench designs.
The inwardly sloped gusset strengthens the Sutherland Bench Bracket while keeping the profile sleek, helping it carry substantial loads without adding bulky visual weight under the bench.
The Federal Brace Sutherland Bench Bracket Stainless 7"H x 14"L, 30412 pairs a low profile gusseted angle design with stainless steel construction, giving benches discrete yet substantial support in both indoor and outdoor settings. Defined spacing and load guidelines for 10", 14", and 16" sizes translate directly into planning bracket counts and locations, so bench runs can be laid out with clear expectations around carry capacity. By using a bracket length that stays within 4" of the bench depth and following the specified spacing into studs, this Sutherland bench support helps deliver stable, well-backed seating that aligns with the visual style and structural needs of the project.