Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Savona Commercial Bench Bracket is a commercial bench bracket from Federal Brace designed to support a low profile floating bench seat in demanding environments. The 0.25 inch thick wall-mounted supporting arm creates a sturdy structure once fixed to the bench seat, so the bench provides secure seating in commercial applications. The bracket uses a wall-mounted design, which transfers bench loads into the supporting structure, helping the bench stay solid under regular traffic. With a size of 16x9x2, the bracket is suited to bench layouts that need a compact support profile while still offering substantial carrying capacity. The durable faux stainless powder coat paint finish gives the bracket a stainless look while protecting the steel in typical interior commercial conditions. This combination of low profile appearance and heavy carrying abilities offers a budget-friendly solution where a clean look and strong performance are both required.
The Savona bench bracket uses 0.53 inch fastener holes for mounting the bench bracket to a supporting structure, giving room for substantial fasteners where structural attachment is required. In addition, the bracket provides three 0.26 inch holes, which are useful for fastening the bench seat or additional structural points, tying the bench surface to the steel arm. The wall-mounted 0.25 inch thick supporting arm is designed to be fixed to a bench seat, which creates a continuous load path from the seating surface back into the wall. This combination of hole sizes and arm thickness supports a straightforward layout for installers planning fastener types and locations around studs or other structural members.
The Savona Commercial Bench Bracket is described as a commercial bench bracket and commercial bench support, so it is aimed at seating applications in commercial environments where secure seating is required. Its low profile floating bench support design helps create benches that appear to float off the wall, which is useful where open space under the bench is desired for cleaning or clear floor access. The 16x9x2 size works with bench configurations that need a moderate projection from the wall while keeping the hardware outline tight under the seat. With a carrying capacity of 500 pounds each, the bracket suits installations where benches must handle repeated loading over time. The faux stainless powder coat finish supports use in interior settings that call for a stainless-style look without the cost of solid stainless components across multiple brackets.
The Savona bench bracket uses a wall-mounted 0.25 inch thick supporting arm, which provides a consistent reference for aligning multiple brackets along a bench run, helping keep the seating surface level. The two 0.53 inch fastener holes offer defined locations for anchoring to a supporting structure, so installers can plan stud or blocking placement to match the bracket. The three 0.26 inch holes give dedicated points for fastening the bench seat, which helps transfer load directly into the steel arm and reduces seat movement. Because each bracket is rated for a 500 pound carrying capacity, spacing between brackets can be laid out with clear load assumptions per support point. The budget-friendly positioning of this commercial bench support allows projects with multiple benches to apply the same bracket model throughout, which helps keep alignment, hole patterns, and installation workflow consistent from one bench to the next.
The Savona Commercial Bench Bracket has a size of 16x9x2, which defines the bracket projection, height, and width for planning bench depth and mounting layout.
The Savona bench bracket has a carrying capacity of 500 pounds each, allowing planners to design commercial benches with substantial live load at each support point.
The Federal Brace Savona bench bracket uses a faux stainless powder coat finish, giving a stainless appearance while providing a durable coated surface in typical interior use.
The 0.25 inch material thickness of the Savona bench bracket supplies a substantial steel section, helping the bracket resist flex and support its 500 pound carrying capacity.
The Savona bench bracket provides two 0.53 inch fastener holes for mounting to a supporting structure and three 0.26 inch holes for fastening the bench seat or added supports.
The Savona Commercial Bench Bracket is designed as a low profile floating bench support for secure seating in commercial applications where wall-mounted benches are required.
The Federal Brace Savona bench bracket stainless 9 inch H x 16 inch L, 30477, pairs a 16x9x2 size with a 0.25 inch thick wall-mounted supporting arm to support low profile floating benches in commercial spaces. Its 500 pound carrying capacity per bracket, dedicated 0.53 inch and 0.26 inch fastener holes, and faux stainless powder coat finish create a practical option where strength, appearance, and cost all matter on multi-bench layouts. For commercial seating projects that call for a commercial bench support bracket with defined dimensions and a low profile look, this Savona Commercial Bench Bracket offers a clear, repeatable solution.
