Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dilworth Countertop Post Support creates an elevated second counter directly above an existing base counter, so you can build extra working or serving surface by using vertical space instead of footprint. The 5 inch height lifts a stone top high enough to function as a separate counter level while staying easy to reach in kitchen, bar, or workstation layouts. A 500 pound carry capacity per support is engineered to handle granite, quartz, or other stone materials, so a run of properly spaced posts can carry substantial loads without overbuilding the structure. The design is specified for counters no greater than 12 inch deep, which focuses use on narrow bar tops, reception ledges, or serving counters where depth is limited but extra surface is valuable. Federal Brace stainless steel construction ties this bracket directly into workstation and countertop bracket projects where strength and clean metal finishes matter.
The Dilworth Countertop Post Support uses a through bolt fastening system into the base counter, so the load from the elevated stone surface transfers directly down through the post and into the structure below. A single 0.375 inch tapped hole is integrated into the support, giving a defined bolt interface that speeds layout and helps repeat positioning across multiple posts on a straight run. Federal Brace specifies use of a professional for drilling installation holes in the base counter, which keeps hole placement and diameter aligned with the through bolt system on solid-surface or stone substrates. The 11 gauge material thickness in the stainless steel body provides a substantial wall section at the mounting points, helping the support resist deformation at the fastener locations during tightening and long-term use.
The Dilworth Countertop Post Support is designed to float a countertop of granite, quartz, or other stone material, so it fits naturally into bar tops, pass-throughs, and workstation counters built around those surfaces. Its role is to provide an elevated second counter directly above the base counter, turning a single-depth area into a two-level serving or working station without changing base cabinetry. The specified counter depth of no greater than 12 inch directs this support to narrow applications such as bar ledges or drink rails, where a compact footprint demands vertical solutions instead of deeper cabinets. In these layouts, the 5 inch height gives enough separation between base and upper surfaces for plates, paperwork, or equipment while keeping sightlines relatively clear. Federal Brace branding and the workstation and countertop brackets classification make this a natural component when you are standardizing around metal counter support hardware in a project sequence.
The through bolt fastening system on this stainless steel countertop post support allows consistent clamping through the base counter, so each post in a run can be tightened to similar tension and share load predictably. The 0.375 inch tapped hole dimension defines the fastener interface, simplifying fabrication drawings and CNC or shop templates when you are preparing base counters for multiple posts. An 11 gauge material thickness in the post body provides a stable bearing surface around the tapped area, which supports repeat installations where posts are aligned on centerlines along the counter edge. Because each Dilworth Countertop Post Support is rated at 500 pounds of carry capacity, you can calculate post spacing against the weight of granite, quartz, or other stone and arrange supports to keep loads within that rating. The stainless steel finish contributes to a consistent appearance across a set of supports, so repeating units along a bar or workstation read as a single, intentional design element while doing the structural work.
The Dilworth Countertop Post Support provides an elevated second counter directly above a base counter, creating additional counter space by lifting a stone surface into a separate working or serving level.
The support has a 5 inch height, lifting the elevated countertop enough to form a distinct second level while keeping reach comfortable for bar, kitchen, or workstation use.
Each Dilworth Countertop Post Support has a 500 pound carry capacity, allowing multiple supports to share the weight of granite, quartz, or other stone countertops along a run.
The Dilworth Countertop Post Support is designed for counters no greater than 12 inch deep, focusing its use on narrow bar tops, serving ledges, and similar applications.
The Dilworth Countertop Post Support uses a through bolt fastening system with a 0.375 inch tapped hole, creating a solid mechanical connection into the base counter.
The support is made from stainless steel with 11 gauge material thickness, giving a robust metal body around the fastening area for structural countertop applications.
The Dilworth Countertop Post Support from Federal Brace is a stainless steel workstation and countertop bracket built specifically to float granite, quartz, or other stone counters up to 12 inch deep at a 5 inch elevated height. Its 500 pound carry capacity per support, 11 gauge material thickness, and defined 0.375 inch tapped through bolt interface provide clear structural parameters when you are laying out bar tops or serving ledges. Use this post support on your next project to create a clean, elevated second counter directly above a base counter while working within known load, depth, and fastening details.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  FB39982 Mfr# 39982 | Post Mount Bearing Plate Kit, Galvanized Finish |
