Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Valencia bar top support is designed to support a floating countertop above another counter or solid surface, so you can elevate a bar or serving ledge over an existing work surface. The back plate facilitates connection to the wall or base cabinet, giving you a fixed structural point for the elevated counter. The gusset then extends above your countertop to support glass or granite counters and other solid surfaces, so the upper top carries weight without relying on visible posts. Our Valencia Elevated Counter Support provides the support strength necessary to elevate and hold a counter or bar over a subcounter, helping you create stepped counters in kitchens or commercial spaces. The Valencia bar top support should not be used on counters deeper than 18 inches, which keeps the span within the tested support range.
The back plate facilitates connection to the wall or base cabinet, so the bracket can be positioned where framing or cabinet structure is available to carry the elevated counter load. Five 0.26 inch straight holes in the back plate provide predefined fastening points, which helps installers tie into studs or solid cabinet panels and spread the load vertically. The Valencia bar top support should not be used on counters deeper than 18 inches; keeping the elevated top within this depth helps the 10x20 geometry and 0.25 inch material thickness work within the specified 500 pound carry capacity. The gusset extends above your countertop to support glass or granite counters and other solid surfaces, creating a clear gap between levels without vertical supports at the front edge.
The Valencia Bar Top Support by Federal Brace is designed to support a floating countertop above another counter or solid surface, making it useful wherever a raised bar or serving shelf is needed over a working counter. Our Valencia Elevated Counter Support provides the support strength necessary to elevate and hold a counter or bar over a subcounter, so it suits stepped kitchen islands, pass-through bars, or reception counters using stone, glass, or other solid surfaces. The gusset can extend above your countertop to support glass or granite counters and other solid surfaces, keeping the upper level visually light while still supported from the structure behind. The back plate facilitates connection to the wall or base cabinet, so the working load from the elevated counter moves into structural elements instead of stressing only the lower top. Because the Valencia bar top support should not be used on counters deeper than 18 inches, it fits projects where the raised counter is kept within a controlled reach depth and overhang.
The material thickness of the Valencia Elevated Counter Support is 1/4 inch, giving a consistent section size that helps installers predict deflection characteristics from one job to the next. The 10x20 size standardizes the relationship between the vertical rise and horizontal projection, so layout of multiple supports along a bar run can follow the same height and reach. Five 0.26 inch straight holes in the back plate provide repeatable fastening locations; aligning these holes with studs or solid cabinet backs helps spread the load evenly from the elevated counter into the structure. Each support has a carry capacity of 500 pounds each, allowing straightforward load calculations for the number of supports needed along a given length of glass, granite, or other solid surface. The Valencia bar top support should not be used on counters deeper than 18 inches, which sets a clear depth limit that keeps the 10x20 geometry operating inside its intended loading envelope. The stainless steel finish on the Valencia bar top support presents a clean metallic appearance that coordinates with many modern counter materials while also offering a hard surface that resists normal jobsite handling during installation and typical use once the counter is in service.
The Valencia Bar Top Support is designed to support a floating countertop above another counter or solid surface, creating an elevated counter or bar over a subcounter.
The Valencia bar top support should not be used on counters deeper than 18 inches, keeping the elevated surface within the bracket's intended reach and support range.
Each Valencia Elevated Counter Support has a carry capacity of 500 pounds each, allowing planning of stone, glass, or other solid surface tops within that rating per support.
The Valencia bar top support uses a back plate with five 0.26 inch straight holes, facilitating connection to a wall or base cabinet for structural support.
The gusset extends above your countertop to support glass or granite counters and other solid surfaces, enabling elevated tops in various materials within the load rating.
The Valencia Elevated Counter Support uses a stainless steel finish and a material thickness of 0.25 inch, providing a metallic look and a substantial section for strength.
The Valencia Bar Top Support by Federal Brace combines a 10x20 size, 0.25 inch material thickness, and a 500 pound carry capacity to support a floating countertop above another counter or solid surface. The back plate facilitates connection to the wall or base cabinet, while the gusset extends above your countertop to support glass or granite counters and other solid surfaces. The Valencia bar top support should not be used on counters deeper than 18 inches, aligning elevated counter depth with the intended reach of the support. Select this Valencia Elevated Counter Support when you need to elevate and hold a counter or bar over a subcounter using a stainless steel finished bracket.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  FB39972 Mfr# 39972 | Standard Brace Fastener Kit, Stainless Steel Finish | ||||
Sold in: 1 Each |  FB39973 Mfr# 39973 | Standard Brace Fastener Kit, Zinc Finish |
