Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Countersunk Brace Fastener Kit gives installers a matched set of fasteners for brackets with countersunk holes, so the screw heads seat correctly and the bracket bears solidly against the mounting surface. The kit is produced by Federal Brace in the workstation and countertop brackets class, aligning it with typical shelf, closet, and garage organization installs where bracket support is critical. The stainless steel finish on the components presents a clean, uniform look wherever exposed fasteners matter, which suits open shelving and visible countertop supports. The kit carries manufacturer part number 39988, which helps keep ordering and reordering precise on repeat projects. The SAP description listing 2.50 x 0.25 x 0.25 ties directly to the 0.25 inch by 2.5 inch lag screw size, so the installer knows the shank diameter and length being supplied for layout planning.
The kit is designed specifically for brackets with countersunk holes, so the lag screw geometry and head shape correspond directly to that hole style during mounting. Each lag screw is 0.25 inch in diameter and 2.5 inches long, which defines the penetration path into wood or similar substrates once the bracket thickness is accounted for. With a stainless steel finish on the visible fastener surfaces, the system aligns well with workstation and countertop brackets that may sit under open tops or shelves. NOMARR surface protectors positioned on every fastener cushion the screw-to-bracket interface as torque is applied, keeping the protected finish closer to its original appearance. The Countersunk Brace Fastener Kit is described as installing three to four brackets, depending on the number of holes in the brackets, which helps plan how many kits to allocate to a run of supports.
The Countersunk Brace Fastener Kit from Federal Brace sits within the workstation and countertop brackets class and the broader shelf, closet, and garage organization shelving and accessories category, so its parts are oriented around mounting structural brackets in those environments. Brackets used in these settings commonly rely on countersunk holes, and this kit is expressly designed for that style, aligning head geometry with the recessed seat. The 0.25 inch x 2.5 inch lag screws work with bracket stock that expects a quarter-inch shank, tying the hardware size to typical bracket engineering. The stated installation range of three to four brackets, depending on how many holes each bracket has, gives a direct sense of project scale that one kit supports, which is useful when planning runs of shelving or countertops.
The 0.25 inch diameter of the countersunk head lag screws anchors directly into a defined pilot pattern, which contributes to consistent pull-down on each bracket and helps produce uniform spacing and alignment along a wall. At 2.5 inches long, each lag screw provides a predictable embedment depth once bracket thickness is subtracted, supporting planning around substrate grip for workstation and countertop brackets. The stainless steel finish on the Countersunk Brace Fastener Kit delivers a uniform fastener appearance across all bracket points, so parallel brackets present a consistent look that aligns with exposed shelf or counter installations. NOMARR surface protectors on every fastener form a barrier between the screw head and the bracket surface, allowing torque to be applied while limiting direct metal-to-finish contact. This supports repeatable results when multiple brackets are tightened to the same torque level without introducing new finish blemishes. The inclusion of RTV silicone within the same kit provides a material option that can be used in conjunction with the mechanical fasteners on workstation and countertop bracket installs, allowing the installer to maintain a single product reference for both anchoring and sealant needs.
The Countersunk Brace Fastener Kit is designed for use with brackets that have countersunk holes, so the screw heads sit flush in the recess and pull the bracket tight.
The kit uses 0.25 inch x 2.5 inch countersunk head lag screws, which defines both the shank diameter and length for planning pilot holes and embedment depth.
The Countersunk Brace Fastener Kit is described as installing three to four brackets, depending on how many holes each bracket has in its design.
The stainless steel finish provides a uniform, clean appearance across visible fasteners, which suits shelving, closet, or countertop bracket work where hardware can be seen.
NOMARR surface protectors sit on every fastener to shield the bracket finish from scratches as the lag screws are tightened into their countersunk seats.
The RTV silicone provides a sealant or bonding option used alongside the mechanical lag screws, which can support workstation and countertop bracket setups that benefit from a flexible joint.
The Countersunk Brace Fastener Kit, in stainless steel finish and built around 0.25 inch x 2.5 inch countersunk head lag screws, is tailored to brackets with countersunk holes in workstation, countertop, and shelving applications. With NOMARR surface protectors on every fastener, the bracket finish is guarded while torque is applied, supporting a cleaner result on visible installs. The kit is described as covering three to four brackets, which ties one purchase to a clear bracket count across typical runs. For projects using Federal Brace or similar workstation and countertop brackets that specify countersunk holes, this kit aligns the required lag screw size, protective interface, and RTV silicone into a single, consistent fastener solution.
