Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Breckenridge mantel bracket is a 5 inch wide U bracket designed to support heavy beam mantels on indoor and outdoor fireplaces, which gives installers a defined structural base when hanging substantial wood beams. The bracket is built from 3/8 inch steel, so it provides a thick, rigid support that resists flexing under load during and after installation. A powder coated flat black finish creates a clean, minimalist look, allowing the bracket to blend into farmhouse, industrial, or modern fireplace designs while still delivering serious holding strength behind the scenes. This model is sized for 6x6 beams, so the interior profile matches the common mantel stock many shops mill or source, simplifying layout and fitment. Each Breckenridge mantel bracket carries 375 pounds, and the rated carrying capacity is 750 pounds per pair, which gives clear load guidance when planning mantel spacing and fastening strategy across a fireplace wall.
This Breckenridge mantel bracket is built with four 0.26 inch countersunk holes in the back flange, giving a defined pattern for tying into rock or stud walls so the load transfers back into the structure. The countersunk detail allows compatible flat-head fasteners to sit below the surface of the steel, so the mantel or surrounding finish can sit directly against the bracket without interference. The bracket is designed as a heavy duty mantel support for 6x6 beams, so the dimensions of the U bracket match common beam stock and simplify layout when laying out cut lines or drilling pilot holes in the beam. With the carrying capacity rated at 375 pounds each, the pair rating of 750 pounds helps you plan bracket count and spacing to meet the expected mantle load on indoor or outdoor fireplaces.
The Federal Brace Breckenridge mantel bracket is designed specifically for the heavy beam mantels commonly used on indoor and outdoor fireplaces, so it fits directly into hearth projects where substantial 6x6 stock is the focal point. The 5 inch wide U bracket form wraps the beam on three sides, which helps align the beam square to the wall while you fasten through the back flange into a rock or stud wall structure. Its flat black powder coated finish supports installations in cozy farmhouse fireplace designs, industrial interiors with exposed structure, or clean modern applications where hardware is minimized. Because each bracket supports 375 pounds, and a pair supports 750 pounds, you can apply it in situations where decorative loads, stone surrounds, or dense wood beams add significant weight. Guidance to space brackets no more than 30 inches apart gives a straightforward layout method for longer mantels, keeping support points within the rated span along a full-width fireplace wall.
The 3/8 inch thick steel used in the Breckenridge mantel bracket provides a stiff mounting structure, which helps the beam stay level once it is set and tied into the wall. That thickness also gives more bearing area around the four 0.26 inch countersunk holes, so fastener heads seat solidly into the steel without deforming the bracket under tightening. The countersunk back flange keeps the mounting surface clean, so the 6x6 beam can sit tight against the bracket and the wall, improving contact and reducing potential gaps along the fireplace face. With the bracket sized for 6x6 beams, carpenters can cut beams to length knowing the U bracket will capture the stock consistently from project to project. The 5 inch width controls side-to-side position, which simplifies repeating the same reveal and projection along a run of brackets when aligning multiple mantels or matching adjacent architectural elements. Combined with the rated 375 pound capacity per bracket, this design supports predictable performance where long-term stability of the fireplace mantel is critical.
The Breckenridge mantel bracket is designed for 6x6 beams, so the U bracket wraps and supports common heavy beam mantels without extra shimming or custom fabrication around the steel.
Each Federal Brace Breckenridge mantel bracket carries 375 pounds, and the pair rating is 750 pounds, which provides clear guidance when determining bracket quantity under a given mantel load.
The back flange has four 0.26 inch countersunk holes that are designed to tie into rock or stud walls, helping transfer mantel loads into common fireplace framing substrates.
The 3/8 inch steel thickness gives the mantel bracket a rigid body, so it resists bending as loads are applied and helps keep the beam level over time on indoor or outdoor fireplaces.
Breckenridge mantel brackets should be spaced no more than 30 inches apart, which creates a consistent support pattern and keeps beam spans within the bracket load guidance.
This mantel support has a flat black powder coated finish and a minimalist U bracket form, so it works visually in farmhouse, industrial, or modern fireplace settings.
The Breckenridge mantel bracket from Federal Brace pairs a 5 inch wide U bracket profile with 3/8 inch steel and a flat black powder coated finish, so it fits 6x6 beam mantels with both structural strength and clean lines. With each bracket rated at 375 pounds, a pair at 750 pounds, and guidance to space units no more than 30 inches apart, it offers clear parameters for planning a mantel layout on indoor or outdoor fireplaces. For projects through Wurth Baer Supply where a defined, heavy duty mantel support is needed, this bracket gives a straightforward, spec-driven choice for building around substantial beam designs.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  FB39988 Mfr# 39988 | Countersunk Brace Fastener Kit, Stainless Steel Finish |
