Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Chevron countertop support bracket describes a gusseted metal bracket designed to support heavier stone countertops such as granite, quartz, concrete and other solid surfaces, so it carries substantial dead load where conventional supports may flex. This 10 x 10 Chevron Countertop Support Bracket in a steel finish sits in the workstation and countertop bracket class, so it is purpose-built for counters, floating desks and similar spans. The Chevron design uses a slim gusset to provide additional support, so the bracket resists deflection under typical countertop overhangs. A stated 500 pound carry capacity per bracket means a row of brackets can support substantial counter runs when no other support is available, which is useful on open walls. Federal Brace specifies this Chevron configuration for wall hung counters and floating desks, so the bracket supports work surfaces while keeping leg space open with no worry of knee knocking.
The Chevron style countertop bracket is suggested for use in all standard applications where a countertop bracket is used - island extension, half wall or pony wall applications and wall shelf mounted, so its mounting pattern aligns with common framing layouts. The bracket uses 3 straight holes at 0.26 inches, which gives installers a consistent interface for selecting and spacing fasteners into studs or blocking. Because the Chevron Bracket material thickness is 0.25 inches, the mounting face presents a solid surface that seats firmly against wood or other framing, helping maintain alignment during fastening. The slim gusset sits between the vertical and horizontal legs, so once mounted, it transfers load from the countertop surface back into the wall structure, helping the assembly resist sag over time.
The Chevron Countertop Support Bracket is described as the perfect selection for supporting wall hung counters, floating desks and similar work surfaces, so it fits projects where open space below is important. In island extension situations, the Chevron style countertop bracket is suggested for use wherever a countertop bracket would normally be installed, so it supports extended overhangs without relying on legs at the outer edge. For half wall or pony wall applications, the 10x10 format allows the horizontal leg to carry common countertop depths while the vertical leg fastens down the wall face, which helps distribute load into the wall structure. When used as a wall shelf mounted support, the gusseted metal design lets the bracket act as both a shelf support and a structural brace, so shelving under heavier solid surface pieces gains added stiffness. The steel finish version aligns visually with typical metal shop components, so it works where exposed steel is acceptable on utility or workstation layouts.
Federal Brace specifies that Chevron Countertop Brackets are designed to provide the strength that comes from a gusseted metal bracket, so the triangular gusset plays a key role in transferring countertop load back to the wall. The slim gusset provides additional resistance to deflection, which means under granite, quartz, concrete and other solid surfaces, the bracket geometry helps limit visible sag between support points. The material thickness of 0.25 inches pairs with this gusset to create a rigid frame, so in typical countertop bracket installations the load path remains predictable. A 500 pound carry capacity per bracket gives installers a clear load rating to work with when planning bracket quantity and spacing along a run. The Chevron style countertop bracket is stated as not useful in the elevated countertop application, so its geometry is oriented to single-height counters rather than raised bar sections. Across island extensions, half walls, pony walls and wall shelf mounted layouts, the combination of quarter-inch material, gusset, and load rating supports heavier solid surface tops in standard bracket roles.
The Chevron Countertop Support Bracket in this listing is a 10x10 size, so both the horizontal and vertical legs are suited to standard countertop overhangs and typical wall heights at workstations.
The Chevron countertop bracket has a 500 pound carry capacity per bracket, so installers can plan bracket spacing for heavy granite, quartz, concrete or other solid surface tops.
The Chevron style countertop bracket is suggested for island extensions, half walls or pony walls and wall shelf mounted applications, so it fits standard countertop bracket locations.
The Chevron Countertop Support Bracket uses a slim gusset to provide additional support and resistance to deflection, so heavier stone countertops stay more stable across the span.
The material thickness of the Chevron Bracket is 0.25 inches, so the quarter-inch metal construction adds stiffness and supports the stated carry capacity in standard applications.
The Chevron style countertop bracket is described as not useful in the elevated countertop application, so it is intended for single-height counters, desks and wall shelf mounted uses.
This 10 x 10 Chevron Countertop Support Bracket in a steel finish combines a 0.25 inch thick gusseted metal body with a 500 pound carry capacity, so it is suited to heavier granite, quartz, concrete and other solid surface installations. Its suggested use across island extensions, half or pony walls, wall hung counters, floating desks and wall shelf mounted layouts means one bracket style can cover multiple station types on the same job. With 3 straight 0.26 inch mounting holes and a Chevron gusset that resists deflection, this bracket is positioned for standard countertop bracket roles where no other support is available along the edge.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  FB39972 Mfr# 39972 | Standard Brace Fastener Kit, Stainless Steel Finish | ||||
Sold in: 1 Each |  FB39973 Mfr# 39973 | Standard Brace Fastener Kit, Zinc Finish |
