
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
18 x 10 workstation bracket from Federal Brace is a heavy duty workstation and countertop bracket designed for wall-mounted desks and similar surfaces. The bracket size of 18x2x10 creates a compact support arm that suits shallow worktops and workstations. A carrying capacity of 500 pounds each allows the bracket to support substantial desktop loads when the structure behind it is suitable. Five cutouts in the bracket web provide routed paths for computer cables, power cords, CAT cables, Ethernet cords and similar lines, helping keep wiring organized along the support. Additional holes for cords expand routing options along the bracket so multiple lines can follow clean paths. The flat black finish presents a neutral, low-glare appearance that blends with many office, shop, or garage layouts.
This wall mounted desk bracket uses four 0.25 inch straight holes and two 1 inch slots for mounting, creating a combination of fixed and slotted attachment points to the supporting surface. The straight holes establish secure, non-shifting anchor locations along the bracket. The 1 inch slots allow some lateral or vertical adjustment during installation before final tightening, which helps align multiple brackets to a shared work surface edge or shared level line. The material identified as 11 gauge provides a substantial steel thickness, supporting the stated 500 pound each carrying capacity when properly anchored to an appropriate structure. The flat black finish on the bracket surfaces keeps sightlines simple wherever the mounting points remain visible below a desk, counter, or work surface.
This Federal Brace workstation and countertop bracket is intended for workstations, counters, and wall-mounted desks where a strong support arm and cable routing are needed together. The 18x2x10 size suits moderate-depth work surfaces often used for computers and office tools. The heavy duty rating of 500 pounds each allows use beneath dense countertops or equipment where bracket strength is critical. Five integrated cutouts in the bracket web are shaped for running computer cables, power cords, CAT cables, Ethernet cords and comparable wiring so lines can follow the bracket span rather than hanging loosely. Additional holes for cords give spots to route or group smaller lines at specific points along the bracket, which supports tidy wiring layouts in offices, shops, and utility rooms.
The four 0.25 inch straight holes and two 1 inch slots for mounting combine stable anchoring with on-site adjustment flexibility. Straight holes locate fixed fastener points on the supporting wall or structure to hold the bracket securely once placed. The 1 inch slots provide adjustment range during installation, helping line up multiple brackets to the same height or edge projection before final tightening. The 11 gauge material thickness supports the 500 pound each carry capacity, contributing to consistent performance when brackets are spaced along a work surface. The flat black finish offers a uniform look across installations, which helps multiple brackets appear visually consistent under a run of desks or counters. The wall mounted desk bracket identity in the description clarifies its role as a structural support in workstation layouts.
The 18x2x10 size defines the bracket proportions, which guides how far it projects under a work surface and how much wall height it occupies during layout.
The carrying capacity of 500 pounds each means every bracket can support up to that load, which is important when planning bracket spacing under a counter or desk.
The five cutouts and additional holes for cords let cables, power cords, CAT, and Ethernet lines follow the bracket, helping keep wiring organized along the support path.
The bracket uses four 0.25 inch straight holes and two 1 inch slots for mounting, offering both fixed anchor points and some adjustment range during installation layout.
The bracket is made from 11 gauge material with a flat black finish, giving substantial steel thickness and a neutral appearance under desks and countertops.
The manufacturer part number FB-00733 and the SAP description WORKSTATION BRACKET 18X2X10 BLACK both identify this specific Federal Brace workstation bracket model.
This 18 x 10 workstation bracket from Federal Brace combines a 500 pound each carrying capacity, 11 gauge material, and cable routing cutouts to support demanding wall-mounted desk or counter layouts. The 18x2x10 size and flat black finish suit workstations, offices, and utility areas that need compact structural support with organized cable paths. For workstation and countertop projects that match its size and load range, this wall mounted desk bracket offers a clear, defined hardware option.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FB39972 Mfr# 39972 | Standard Brace Fastener Kit, Stainless Steel Finish | ||||
Sold in: 1 Each | FB39973 Mfr# 39973 | Standard Brace Fastener Kit, Zinc Finish |