Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3M VHB Tape Glass Fastening System is a clear, double sided very high bonding tape designed as an alternative to screws, rivets, welds and other mechanical fasteners, so brackets can be mounted without drilling or welding workpieces. This high strength bonding tape permanently adheres one substrate to another, creating a continuous bond line instead of point loads. That spread-out stress load helps brackets and their top plates stay evenly supported along the full tape length during service. Once joined, materials are unable to separate under normal handling, so installed brackets and glass or other mating surfaces stay fixed in position. The 2 inch width matches 2 inch wide top plates, so the tape covers the full plate surface for consistent contact. Federal Brace branding and the dedicated glass fastening system designation identify this tape for bracket installations where clear, strong bonding is required.
The 30 inch by 2 inch roll length is specified to install three brackets with a 10 inch long by 2 inch wide top plate, so each bracket top plate receives a dedicated 10 inch tape segment sized to its full footprint. Cut-to-fit use means the installer trims the tape to 10 inch lengths, so each piece aligns with the length and 2 inch width of the top plate without overhang. Because the tape is double sided very high bonding tape, each cut segment can adhere to both the bracket top plate and the mating substrate, forming a full-surface interface. Using a single continuous strip per bracket simplifies layout, as the 2 inch width already matches the 2 inch wide top plate dimension. This dimensioned approach supports repeatable bracket setups whenever 10 inch long top plates are used with this system.
This 3M VHB Tape Glass Fastening System is described in the Shelf, Closet & Garage Organization and Shelving & Accessories category, so it aligns with shelving and related organization work. The product is also classified under workstation and countertop brackets, so it supports bracket-based workstations or countertops where a taped bond is preferred. The specified application to install three brackets with a 10 inch long by 2 inch wide top plate shows it is sized for bracket runs using that plate dimension. Because the material is clear double sided very high bonding tape, it is suited for glass fastening or other applications where the bond line should remain as unobtrusive as possible. This combination of shelving-oriented categorization and bracket sizing gives installers a defined role for the tape in closet, garage, or workstation bracket layouts.
The 2 inch width directly matches a 2 inch wide top plate, so the tape covers the full width of the plate, supporting consistent bonding across the entire bearing surface. With a 30 inch length supporting three brackets, each 10 inch segment mirrors a 10 inch long top plate, simplifying layout and tape allocation on multi-bracket runs. The high strength bonding tape permanently adheres one substrate to another, so the bracket-to-substrate interface stays fixed once pressed into place. By spreading stress across the entire length, the tape helps distribute forces along the bracket span, reducing concentration at single fastener points. Because materials are described as unable to separate once joined, the tape supports long-term bracket positioning without additional mechanical fastening at those locations. The clear, double sided construction keeps the bond line discreet while still providing adhesion to both the bracket and the mating shelf, glass, or panel surface.
The 3M VHB Tape Glass Fastening System roll is specified at 30 inches by 2 inches, so installers can cut three 10 inch segments that each match a 2 inch wide top plate.
The Federal Brace system is described to install three brackets with a 10 inch long by 2 inch wide top plate, so the 30 inch roll is proportioned for a three-bracket run.
This high strength bonding tape is designed and proven as an alternative to screws, rivets, welds and other mechanical fasteners, so it replaces those point fasteners with a continuous bonded interface.
The tape spreads the stress load across the entire length, so forces are carried along the full bond rather than concentrated at single points, supporting more even performance on bracket top plates.
The product is named 3M VHB Tape Glass Fastening System and uses clear double sided very high bonding tape, so it suits glass-related fastening where a clear bond line is important.
The high strength bonding tape permanently adheres one substrate to another, so it is intended for joining bracket top plates to their mating shelves, glass panels, or similar installation surfaces.
The 3M VHB Tape Glass Fastening System pairs a 30 inch by 2 inch clear double sided very high bonding tape roll with a defined use case of three 10 inch long by 2 inch wide top plates, so bracket runs using that footprint gain a straightforward bonding method. The tape is designed and proven as an alternative to screws, rivets, welds and other mechanical fasteners, so it supports a continuous bond line wherever those fasteners would normally be placed. For shelving, closet organization, or workstation and countertop bracket projects using Federal Brace components, this system gives a clear path from specified dimensions to a permanent adhered connection.