Federal Brace Carolina Series Floating Vanity Support Black Steel 16" x 2" x 16", - FB-01848

Federal Brace Carolina Bracket For Floating Vanities

Federal Brace Carolina Commercial Bracket is a floating vanity bracket designed as a heavy duty half wall counter support. This 16 x 2 x 16 inch black steel support carries up to 500 pounds each, which lets you plan substantial commercial counters or vanities with confidence in the structural support. The bracket is part of the Carolina Series in the ADA and Vanity Brackets class, so it fits projects where accessible, open space below the counter is required. The bracket is made from 11 to 7 gauge material thickness, giving a robust steel section that resists deflection under heavy tops. A painted black finish on the steel provides a clean, neutral appearance for exposed installations. This vanity support is made in the USA, aligning with commercial projects that require domestically manufactured components for specification compliance.

Key Carolina Vanity Support Details For Pros

• The 16 x 2 x 16 inch size defines the vertical leg, horizontal arm, and mounting width, which helps you lay out bracket spacing and embedment along a half wall for consistent support.
• A 500 pounds each carry capacity allows you to design for heavy tops in schools, banks, restaurants, and other commercial spaces without overloading a single support point.
• Material thickness ranging from 11 to 7 gauge creates a stout bracket section, which reduces flex under load and supports long-term alignment of counters and vanities.
• Six or eight 0.26 inch straight holes give clear fastening points along the bracket, helping you plan fastener type, drilling pattern, and load distribution into the wall structure.
• The painted black steel finish offers a dark, uniform surface that blends with many commercial interiors while still marking the support line for layout and inspection.
• Finishes available in black or grey across the Carolina Commercial Bracket line give design flexibility when coordinating exposed supports with surrounding casework and wall finishes.

Floating Vanity Bracket Mounting And Layout Use

This Carolina vanity support functions as a half wall counter support, so the bracket geometry is suited to mounting on a framed or masonry half wall where a horizontal arm projects out to carry a counter or vanity. The 16 inch horizontal dimension helps determine how far the supported surface projects, which is important when sizing commercial counters. The 2 inch mounting width aligns with typical stud or blocking layouts, allowing the vertical member to sit flat on framing while the multiple 0.26 inch straight holes provide fastening positions. With a 16 inch vertical dimension, the bracket sets a defined drop from the counter to the lower attachment point, which you can factor into wall build-up and finish layers. The ADA and Vanity Bracket category ties the product to installations where knee clearance and open space under the counter are required as part of the design.

Where This Floating Vanity Bracket Fits Best

Heavy Duty Half Wall Support In Commercial Spaces

This Carolina vanity support is described for heavy duty half wall counter support in large commercial projects, linking it directly to environments such as schools, banks, and restaurants. That application focus means the 500 pounds each carry capacity is intended for substantial surface loads, including stone or solid surface tops, equipment, and regular commercial traffic. The bracket sits within the Builders Hardware and ADA & Vanity Brackets category, associating it with architectural hardware chosen during project detailing rather than light residential fixtures. Being made right here in the USA supports projects that specify domestic origin components for public or institutional work. Painted black or grey finish options across the Carolina Commercial Bracket line let you coordinate exposed supports with the visual language of the space, including darker millwork or neutral-toned service counters.

Bracket Details That Support Reliable Installations

The 11 to 7 gauge material thickness of this floating vanity bracket provides a substantial steel section, which supports the stated 500 pounds each carry capacity and helps maintain a level counter under operating loads. The 16 x 2 x 16 dimensions give predictable geometry that simplifies repeating bracket spacing along a wall, so load paths remain consistent from support to support. Six or eight 0.26 inch straight holes are sized to accept commonly used structural fasteners for this bracket class, giving you multiple locations to engage studs or blocking and spread forces into the wall. The ADA and Vanity Bracket classification points toward applications with open space requirements, which suits floating vanities and counters where floor support is intentionally omitted. The black painted finish on this Federal Brace model provides a uniform coating over the steel, which helps visually integrate the support beneath counters and assists in reading bracket placement during field verification.

Common Questions About The Carolina Vanity Support

Selecting This Bracket For Your Next Counter Run

The Carolina vanity support 16x2x16 black bracket combines a defined 16 inch projection, 11 to 7 gauge steel, and a 500 pounds each carry capacity, giving you a clearly rated floating vanity bracket for heavy duty half wall counter support. The ADA and Vanity Brackets classification, along with its use in schools, banks, restaurants, and other large commercial projects, ties this model directly to accessible, open space counter designs. When a black painted steel finish and made in USA origin matter alongside load rating, this Federal Brace Carolina Commercial Bracket gives a documented option to integrate into your next counter or vanity layout.