
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Floating shelf support rod bracket from Federal Brace is designed to install floating shelves while keeping the installation invisible, so the shelf appears to float with a clean and sturdy look on the wall. This 10 x 34-1/2 inch bracket uses heavy-duty support rods concealed inside the shelf, so the strength comes from internal steel rather than visible angles or corbels. The bracket supports from 150 to 250 pounds according to style selection, which lets you match the support level to the shelf layout and expected load. A raw, unfinished steel finish provides a solid base for a shop-applied finish system, so the bracket can suit project requirements. As part of Federal Brace floating shelf support rod brackets in the floating shelves and concealed brackets class, this unit fits demanding wall-mounted shelving jobs where appearance and strength both matter.
This 10 x 34-1/2 inch floating shelf support rod bracket uses slotted holes for easy stud alignment, so the bracket can shift slightly to land over framing while still keeping the rod layout consistent. The bracket is sized as part of a family that includes 6 x 34 inch options for 3 foot floating shelves, which gives installers a reference for matching bracket length to shelf length during planning. The pre engineered stud correlation built into the slots means the layout anticipates common stud spacing, which simplifies measuring and marking. With a plate built from 0.25 inch steel and 0.75 inch diameter rods extending into the shelf, the installation focuses on anchoring a single rigid assembly to the wall, which helps streamline the workflow on recurring projects.
This Federal Brace floating shelf support rod bracket is classified under shelf, closet and garage organization and floating shelves, so it suits storage and display runs where the hardware stays concealed. The 10 x 34-1/2 inch format fits into layouts where the bracket length supports deeper shelves while the rod system remains hidden. Brackets in this series are described as the perfect way to install floating shelves, which positions them for wall-mounted shelf systems that rely on steel rods rather than external supports. The unfinished steel finish fits workshop, closet, or garage environments where paint or protective coatings are part of the broader project scope. Heavy-duty rod construction helps support dense items on these floating shelves, which lets the bracket serve in both residential and light commercial shelving plans built around concealed hardware.
Slotted holes in the plate are designed for easy stud alignment, which helps repeat the same installation pattern across multiple bays without reworking hole locations. Pre engineered stud correlation in those slots speeds layout, because the installer can position the plate to catch studs while maintaining consistent rod spacing relative to the shelf edge. The 0.75 inch diameter rods give a consistent drilling target inside the shelf, which supports jig-based boring so rod holes stay straight and aligned. A 0.25 inch thick plate provides a rigid reference surface against the wall, which keeps the bracket square as it is tightened so shelves seat consistently across a run. Carry capacities of 150 pounds for 2 rod brackets and 250 pounds for 3 rod brackets help standardize bracket counts per shelf length, so designs can be repeated with predictable performance.
The bracket supports from 150 to 250 pounds according to style selection, so shelf designs can be matched to expected storage loads within that carry capacity range.
The bracket has perfectly spaced slotted holes designed for easy stud alignment, so the plate can shift to catch studs while maintaining the intended rod layout.
The bracket is a 10 x 34-1/2 inch floating shelf support rod bracket, which suits deeper floating shelf designs needing a longer concealed support assembly.
The bracket uses unfinished raw steel in both the 0.75 inch rods and 0.25 inch plate, providing a steel surface that can receive job-specific coatings or finishes.
The support uses 0.75 inch diameter heavy-duty rods and a 0.25 inch thick plate, giving substantial steel sections for stiffness at the wall and inside the shelf.
The series description lists sizes 6 x 22.5 and 10 x 22.5 for 2 foot floating shelves, and 6 x 34 for 3 foot floating shelves, indicating length options for different shelf spans.
The 10 x 34-1/2 inch Federal Brace floating shelf support rod bracket in unfinished steel provides concealed support for floating shelves using heavy-duty 0.75 inch rods and a 0.25 inch plate. With slotted holes designed for pre engineered stud correlation and carry capacities from 150 to 250 pounds according to style selection, it fits projects where a clean visual line and dependable load handling both matter. Use this bracket when planning floating shelf runs that rely on internal steel support with predictable stud engagement.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FBFB-08606 Mfr# FB-08606 | 6" x 22-1/2" Floating Shelf Support Rod Bracket, Steel Finish | ||||
Sold in: 1 Each | FBFB-08614 Mfr# FB-08614 | 6" x 34-1/2" Floating Shelf Support Rod Bracket, Steel Finish |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FB39972 Mfr# 39972 | Standard Brace Fastener Kit, Stainless Steel Finish | ||||
Sold in: 1 Each | FB39973 Mfr# 39973 | Standard Brace Fastener Kit, Zinc Finish |