Pewter Pine edgebanding 1mm thick, 15/16 inch width x 600 ft is a PVC edge banding that covers and protects exposed panel edges, so cabinet and furniture projects finish with a uniform Pewter Pine look. The 1mm thickness gives a solid edge profile that stands up well on everyday cabinet runs where thin tape would feel too light. The 15/16 inch width works well on standard panel thicknesses, giving enough material to trim flush without leaving a gap at the edge. The 600 ft length supports long production runs or multiple jobs from a single roll, which keeps edge color and texture consistent across a project. Manufactured by Rehau, Inc., this edge banding matches their Pewter Pine design family, so builders can carry the same tone from flat surfaces to vertical edges. Wurth Baer Supply offers this roll for woodworking applications that call for PVC edgebanding in a Pewter Pine finish.
This Pewter Pine edgebanding 1mm thick, 15/16 inch width x 600 ft is sized for edge coverage and trimming in woodworking environments. The 1mm thickness means the edge presents a balanced profile, which suits cabinets and casework needing a noticeable yet manageable edge. With 15/16 inch width, there is working room to align the band to the face, trim flush on both sides, and keep the underlying panel out of view along the full edge. Being a PVC edge banding, it integrates with PVC-oriented edgebanding processes used in professional shops and serious DIY setups. The continuous 600 ft length on this roll means fewer changeovers, which keeps settings consistent from the first cabinet edge to the last within a project run.
Pewter Pine edgebanding 1mm thick, 15/16 inch width x 600 ft serves as edge coverage for panels in cabinet, furniture, and general woodworking projects where a Pewter Pine look is specified. As a PVC product in the Edgebanding & Surfacing category, it fits into workflows that already use PVC edge banding for laminated or surfaced boards. The 15/16 inch width suits common panel dimensions used in casework, providing an edge strip slightly wider than the board so it can be trimmed flush. With a total length of 600 ft, a single roll supports edging for multiple cabinet runs, closet sections, or furniture pieces in the same Pewter Pine tone. The Rehau, Inc. branding and manufacturer part number 301799-140 give shops a precise reference when aligning this edgebanding to design specifications or drawings that call for Pewter Pine PVC.
The 1mm thickness of this Pewter Pine edgebanding gives a more substantial PVC edge than very thin tape, which benefits edgebander setup because the material tracks more predictably during application and trimming. That same thickness provides a defined edge radius after trimming, which contributes to a finished edge that feels consistent along cabinet doors and panels. The 15/16 inch width aligns well with standard woodworking practice, where an edge band slightly exceeds panel thickness so installers can trim down to a clean line without exposing the substrate. This width helps maintain a uniform reveal along corners and panel joins. The 600 ft roll length reduces interruptions to change rolls over the course of a project, which helps keep heat, feed, and trim settings steady on the machine, leading to consistent results from one piece to the next. As a PVC edge banding categorized under Edgebanding & Surfacing, it fits into established tooling, adhesive, and handling routines built around PVC materials in professional woodworking shops.
Pewter Pine edgebanding 1mm thick, 15/16 inch width x 600 ft provides a 1mm PVC edge at 15/16 inch wide over a total run of 600 feet, supporting extended cabinet and furniture edging.
Pewter Pine edgebanding 1mm thick, 15/16 inch width x 600 ft is a PVC edge banding, so it fits PVC-focused edgebanding equipment and workflows commonly used in woodworking shops.
This Pewter Pine edgebanding 1mm thick, 15/16 inch width x 600 ft is manufactured by Rehau, Inc., giving buyers a branded option that matches Rehau design references.
The 1mm thickness of this Pewter Pine edgebanding creates a noticeable PVC edge that trims cleanly and leaves a defined profile, which supports a consistent feel on cabinet doors and panels.
The 15/16 inch width on this Pewter Pine PVC edge banding provides slight overhang on typical panel edges, allowing trimming to a flush, uniform finish without exposing the panel core.
The manufacturer part number 301799-140 identifies this specific Rehau Pewter Pine PVC edgebanding 1mm thick, 15/16 inch wide x 600 ft, supporting accurate product selection for repeat orders.
Pewter Pine edgebanding 1mm thick, 15/16 inch width x 600 ft provides a PVC edge solution sized for standard cabinet and casework panels. The 1mm thickness, 15/16 inch width, and 600 ft roll length give shops a predictable, repeatable edge material in the Pewter Pine design. With clear identification as Rehau, Inc. part number 301799-140 in the Edgebanding & Surfacing category, this roll aligns well with drawings and material lists that call for Pewter Pine PVC edge banding from Wurth Baer Supply.
Sold In: 1 Roll