Olive Detour edgebanding is a 23mm wide, 1.2mm thick ABS laser edgebanding from Rehau designed to finish exposed panel edges with a consistent Olive Detour appearance. The 23mm width covers standard panel edges with room to trim, helping create straight, flush lines along cabinets or furniture parts. The 1.2mm thickness adds a defined edge profile, giving panels a solid, finished look once trimmed and flushed. The ABS laser construction is designed for laser-based edgebanding systems, supporting a streamlined, one-pass workflow in shops equipped for this process. The 328 FT length on a single roll provides extended run capacity for repeatable color and texture across multiple parts or projects, reducing changeovers during production runs. The Olive Detour design ties directly to the Rehau color family, helping align this edging with matching surfaces from the same range.
This Olive Detour edgebanding from Rehau is produced at 23mm width, giving installers enough edge coverage to align and trim without exposing the core material on standard board thicknesses. That extra width margin helps maintain straight, chip-free edges after trimming operations. The 1.2mm thickness gives the edge enough body to track cleanly through edgebanding machinery, supporting controlled feed and stable trimming passes. As ABS laser edgebanding, it is intended for laser-equipped edgebanders, allowing the laser process to activate the functional layer and bond the edging in a single run. The 328 FT length on the roll keeps more edge material available during setup, which reduces roll changes and helps keep machine alignment stable across a series of similar parts.
This Olive Detour edgebanding is categorized by Wurth Baer Supply as Edgebanding & Surfacing in the Edgebanding, PVC product class, positioning it for use on panel-based woodworking projects. The 23mm width makes it suitable for edging cabinet cases, shelves, and panel doors built from sheet goods where a slightly over-sized edge is preferred for trimming. The 1.2mm thick profile works well when a more pronounced edge is desired, such as visible cabinet sides or work surfaces that benefit from a defined edge line. Being part of the Olive Detour design family, it is intended to visually coordinate with Olive Detour surfaces, helping installers carry the same tone across faces and edges. The 328 FT run length supports small to medium production batches where a single color is used across many components.
The specified 23mm width gives operators a predictable amount of overhang to dial in trimming knives or routers, which supports repeatable, flush results without risking exposure of the substrate. The 1.2mm thickness gives the edge enough mass to resist damage during handling and trimming, supporting a cleaner, square profile along the finished part. As ABS laser edgebanding, it is built for laser-based application, which is designed to combine activation and bonding into a streamlined pass that supports uniform bond lines and clean transitions to the panel surface. The 328 FT length per roll helps maintain consistent color and gloss across an entire job because multiple panels can be edged from the same continuous run. Together, these characteristics allow shops using laser edgebanders to standardize settings around this specific Olive Detour, 23mm x 1.2mm profile for more predictable outcomes.
The edgebanding is 23mm wide and 1.2mm thick, providing coverage and trimming margin on panel edges while creating a defined edge profile once machined flush.
This product is ABS laser edgebanding, designed for laser-based edgebanding systems where the functional layer is activated by laser during the edge application pass.
The roll length is 328 FT, allowing multiple cabinets or panel runs to be edged from one continuous supply for consistent Olive Detour appearance.
The edgebanding is manufactured by Rehau, Inc., as indicated by the brand listing, and is offered by Wurth Baer Supply to the woodworking industry.
The manufacturer part number is 964062-033, which identifies this specific Olive Detour, 23mm x 1.2mm ABS laser edgebanding configuration.
Wurth Baer Supply classifies it under Edgebanding & Surfacing in the Edgebanding, PVC product class, aligning it with panel edge finishing materials.
Choose this Olive Detour edgebanding when a 23mm wide, 1.2mm thick ABS laser edge is needed to match Olive Detour panel designs. The Rehau brand, Olive Detour designation, and 328 FT roll length together support coordinated, repeatable edging on cabinet and furniture projects using laser edgebanders. Using this specific 964062-033 profile lets shops align their edging choice with the Olive Detour surface program while standardizing machine settings around a consistent width, thickness, and material for efficient runs.
Sold In: 1 Roll