Fog edgebanding 0.018mm thick gives a thin PVC edge treatment that finishes exposed core on panels, so you can match a fog grey design while covering raw substrate on cabinets, shelving, or casework. The 15/16 inch width provides enough coverage over standard panel thicknesses and minor overhang, allowing trimming back to a tight, professional edge. The 600 FT length supplies a continuous run of material, which supports batch work on multiple cabinets or a full project run without frequent changeovers. The PVC construction defines the product as plastic edge banding, which works where a matching fog grey edge is needed on compatible panel finishes in woodworking environments. The edge banding format positions this product for use wherever a durable PVC strip is applied along board edges as part of the surfacing workflow.
The 15/16 inch width establishes how this fog grey PVC edgebanding seats on the edge, giving you coverage for common panel thicknesses with room for trimming to a clean line. The 0.018mm thickness sets the profile of the edge, which affects how the band transitions to the panel surface once trimmed and finished. The 600 FT length determines how far one roll goes in your shop, supporting layouts where you run continuous edges along multiple components. As PVC edge banding, this product fits workflows where a fog grey strip is bonded along exposed board edges as part of standard edgebanding practice.
This fog edgebanding 0.018mm thick, 15/16 width x 600 FT is positioned for cabinet, furniture, and casework projects that call for a fog grey edge. The 15/16 inch width lets you address typical panel edges across doors, drawer fronts, and cabinet sides while trimming back to the face. The fog grey color targets builds or repairs where that specific tone is part of the design, such as fog grey fronts or coordinated interiors. The 600 FT roll length supports shops producing multiple units in the same finish, so edges on related pieces stay consistent from the same run of material. As PVC edge banding, it serves wherever a plastic strip is bonded to board edges in woodworking environments that rely on edgebanding for a finished look.
The defined 15/16 inch width provides a predictable amount of overhang beyond common panel thicknesses, which helps you set up trimming operations for consistent reveals from part to part. The 0.018mm thickness establishes a known edge profile, so you can plan how the banding meets adjacent surfaces and how the fog grey edge will appear in finished assemblies. The 600 FT length means one roll can be carried through repetitive work, supporting uniform color and surface appearance across an entire run of doors or cases. With PVC construction and a fog grey tone, this edge banding ties the finished edge color directly to the specified material, supporting repeatable results whenever you standardize on fog grey PVC edges.
Fog edgebanding 0.018mm thick, 15/16 width x 600 FT provides a thin PVC strip with enough width for typical panel edges and a long roll length for extended cabinet or casework runs.
Fog edgebanding 0.018mm thick, 15/16 width x 600 FT is identified as PVC edge banding, so it functions as a plastic strip used to finish exposed board edges in woodworking projects.
Fog edgebanding 15/16 width offers coverage for standard panel thicknesses with extra material, allowing trimming back to a straight fog grey edge along doors, drawer fronts, or cabinet sides.
Fog edgebanding 0.018mm thick creates a relatively thin edge profile, which helps the PVC strip sit close to the panel surface and keeps the fog grey edge visually controlled after trimming.
Fog edgebanding 0.018mm thick, 15/16 width x 600 FT suits runs of cabinets, furniture, or casework where a fog grey PVC edge is repeated across many parts from a single roll.
Fog edgebanding 0.018mm thick, 15/16 width x 600 FT is from Rehau, Inc., aligning the product with that manufacturer for shops standardizing on specific PVC edge banding brands.
Fog edgebanding 0.018mm thick, 15/16 width x 600 FT from Rehau, Inc. combines a fog grey tone with defined width, thickness, and roll length for edge finishing. For projects calling for fog grey PVC edges along cabinet, furniture, or casework panels, this edge banding provides the specified dimensions and material to support consistent results across your production run.
Sold In: 1 Roll