Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pecan Woodline edgebanding describes a PVC edge banding in a Pecan Woodline design that covers and protects raw panel edges, so cabinet and furniture projects get a consistent finished look along every exposed side. The .018mm thickness creates a slim edge profile that blends closely with panel faces, which helps installers deliver a uniform appearance on modern casework. The 15/16 inch width gives coverage over common 3/4 inch panels with a small trim margin, supporting tight, straight trimming passes. The 600 FT length is suited to production runs or multi-cabinet jobs, reducing roll changes during the workflow. The PVC material places this product in the Edgebanding & Surfacing category, fitting standard shop edgebanding processes. Identification by manufacturer part number 716041-540 helps match this exact Pecan Woodline version across drawings, cut lists, and reorders.
The 15/16 inch width of this Pecan Woodline PVC edgebanding provides extra coverage beyond standard 3/4 inch boards, so there is material available for trimming flush on both faces. The .018mm thickness yields a fine edge that responds well to typical edgebander trimming and scraping, helping reduce noticeable transition lines between banding and panel. Being PVC edge banding, it is suited to equipment and gluing processes designed for PVC materials, which supports repeatable bonding and consistent feed through the machine. The 600 FT length means a single roll can stay loaded through multiple changeovers of panel sizes, which supports smoother scheduling on the edgebander.
This Pecan Woodline edgebanding from Rehau, Inc. is a PVC edge banding intended for covering exposed panel edges in cabinet, furniture, and general woodworking projects that use matching Pecan Woodline surfaces. Its placement in the Edgebanding & Surfacing, Edgebanding, PVC category confirms its role as a decorative and protective edge treatment rather than a structural component, so it fits naturally into panel finishing steps. The 15/16 inch width makes it a solid choice for work based on 3/4 inch engineered panels where a slight overhang is preferred for trimming. On banks of cabinets, tall pantry sides, or furniture carcasses, the 600 FT length allows the same Pecan Woodline edge to be carried across many parts, supporting visual continuity from piece to piece.
The .018mm thickness of this PVC edgebanding creates a lean edge layer that transitions smoothly from face to edge, which helps reduce the visual break between the panel and band once trimmed and finished. Because it is PVC edge banding, it aligns with common edgebanding machines and standard shop processes, supporting predictable cutting, trimming, and finishing behavior. The defined 15/16 inch width gives operators a known margin to work with, which supports consistent setup of trimmers and scrapers across jobs that share the same substrate thickness. The 600 FT roll length means installers can maintain the same product on the machine for extended runs, helping keep color and design alignment consistent throughout a project. The specific manufacturer part number 716041-540 further supports repeated, accurate selection of this exact Pecan Woodline design whenever the same edge appearance is required again.
Pecan Woodline edgebanding is a PVC edge banding from Rehau, Inc. used to cover and finish exposed panel edges, so cabinets and furniture pieces present a coordinated Pecan Woodline design.
The Rehau Pecan Woodline edge banding has a 15/16 inch width, giving coverage beyond typical 3/4 inch panels so installers have material to trim back to a clean, flush edge.
This PVC edge banding is .018mm thick, creating a slim edge that blends closely with the panel face, which supports a smooth transition after trimming and finishing.
The 716041-540 Pecan Woodline PVC edgebanding roll is 600 FT long, allowing extended cabinet or furniture runs with the same product loaded on the edgebander.
This 15/16 inch edgebanding is made from PVC, aligning it with standard PVC edgebanding processes used in cabinet and woodworking shops.
Manufacturer part number 716041-540 specifically identifies this Pecan Woodline PVC edgebanding, helping match the same design and dimensions for future jobs.
This Pecan Woodline edgebanding .018mm thick, 15/16 inch width x 600 FT from Rehau, Inc. provides a defined PVC edge solution for Pecan Woodline projects. The combination of narrow thickness, 15/16 inch coverage, and extended 600 FT length supports efficient, repeatable edging on cabinets and furniture. Referencing part number 716041-540 keeps material selection aligned with drawings and past work. Add this PVC edgebanding to your next Pecan Woodline job to carry the same edge detail across all exposed panel sides.
Sold In: 1 Roll