Folkstone edgebanding 3mm gives you a defined 3mm thick PVC edge in a Folkstone color across a full 300 FT run, so cabinet and furniture panels finish with a consistent, uniform appearance along every exposed edge. The 15/16 inch width covers standard panel thicknesses with room to trim, which helps hide slight layout variation at the edge and keeps the face material fully protected. As a PVC edge banding, the material works well wherever a PVC-based edge is required to finish raw panel cores. The 300 FT length in one roll supports larger jobs or repeated runs in the same color, so a shop can edge multiple components without color shifts between pieces.
The 15/16 inch width of this Folkstone PVC edgebanding gives you margin on each side of typical panel thickness, so panels can be run through an edgebanding process and then trimmed back to a flush edge. The 3mm thickness presents a noticeable, square edge profile, which influences the type of trimming and edge machining used after bonding. With 300 FT available in one continuous length, an installer can set up the edgebander once and run a series of parts in sequence, which supports consistent feed settings and edge quality from the first part to the last.
This Folkstone edgebanding 3mm thick, 15/16 inch wide, is suited to finishing the exposed edges of panels where a PVC edge in a Folkstone color is desired. The 3mm thickness creates a solid visual band around the panel perimeter, which can complement surfaces that coordinate with a Folkstone tone. Because the material is supplied as PVC edge banding, it integrates into established edgebanding processes in cabinet and woodworking shops that work with PVC-based materials. The 300 FT length is useful when multiple cabinet boxes, shelves, or fronts share the same edge color, supporting repeated runs without changing material midstream.
The combination of 3mm thickness and 15/16 inch width in this Rehau, Inc. edge banding gives installers a steady geometry to set up trimming tools against, which can help maintain flush, chip-free edge transitions. The extra width beyond common panel thickness allows slight adjustment in tracking during edging without exposing the core after trimming. The 300 FT roll length keeps the Folkstone color continuous across long production sequences, reducing the chance of visible variation from switching to a different roll. Identified by manufacturer part number 302124-073, this specific PVC edge banding can be referenced consistently in shop notes and job specifications so that repeat orders match the same Folkstone edge material.
The Folkstone edgebanding is 3mm thick, 15/16 inch wide, and 300 FT long, providing a defined edge profile and enough length for multiple panels in the same color run.
This 15/16 x 3mm Folkstone banding is PVC edge banding, so it fits workflows that are set up for bonding and trimming PVC-based edges on panels.
The 3mm thickness creates a substantial edge profile, which can give panels a more pronounced visual band while helping shield the panel core at the edge.
The 15/16 inch width provides overhang on both sides of typical panel thickness, so installers can trim back to a clean, flush line without exposing the core.
The 300 FT length supports longer production runs of cabinets or casework in the same Folkstone color, helping keep edge appearance consistent across many parts.
Part number 302124-073 identifies this specific Rehau Folkstone PVC edge banding, helping shops re-order the same 3mm, 15/16 inch, 300 FT material for repeat jobs.
This Rehau Folkstone edgebanding 3mm thick, 15/16 inch wide, 300 FT long is suited to projects calling for a PVC edge in a Folkstone tone across multiple panels. When a job specifies a 3mm PVC edge with this color and part number 302124-073, choosing this roll allows shops to align panel edging with that requirement and run consistent edges through standard edgebanding equipment.
Sold In: 1 Roll