Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Natural Teak Edgebanding .018mm Thick from Rehau, Inc. is PVC edge banding in a Natural Teak tone that covers raw panel edges so the finished piece matches the surface visually along the edge line. The 15/16 inch width spans common panel thicknesses while allowing a small trim margin, which helps get a flush finish after banding equipment or hand tools remove the excess. The .018mm thickness provides a low-profile edge, which helps the band sit close to the panel face for a neat transition between surfaces. The 600 FT length is suited to multi-piece cabinet or furniture runs, reducing changeovers on an edgebander during production. As a PVC edgebanding, it belongs to the Edgebanding & Surfacing category, so it fits into standard shop workflows where synthetic banding is preferred for consistent machining.
The 15/16 inch width of this Natural Teak PVC edgebanding gives a bit of overhang on standard panel thicknesses, which allows trimming tools or edgebanding machines to cut back to a clean, consistent edge. The .018mm thickness keeps the material relatively thin, which helps it follow the flat panel edge and maintain a subtle profile at doors and carcass sides. The 600 FT length supplies continuous material for multiple panels, which supports steady throughput on cabinet and furniture projects without constant roll changes during installation workflows.
This Natural Teak PVC edge banding is identified as Edge Banding in the Edgebanding & Surfacing category, so it is intended to finish exposed panel edges in cabinet, furniture, and similar woodworking applications. The 15/16 inch width lets it bridge the full thickness of many sheet goods while leaving slight top and bottom overhang, which is useful when applying the band before trimming to final size. The Natural Teak tone ties into projects using decor or laminate in that range, so doors, shelves, and cases can carry the same visual character around the perimeter of each piece. With 600 FT available, shops can run full kitchens, banks of casework, or repeated furniture components from a single roll, which supports consistent results across matching units.
The .018mm thickness rating defines how much material sits proud of the panel face, which affects how the band responds to trimming and finishing passes on an edgebander or with hand tools. Thinner PVC like this helps achieve a modest edge reveal, supporting a smooth transition between face and edge for everyday cabinet use. The 15/16 inch width works with common panel sizes, which simplifies setup when operators dial in trimming heads or handheld trimmers for repeat passes. The manufacturer part number 716041-199 uniquely identifies this Natural Teak PVC edgebanding, which aids reordering the same color, width, thickness, and 600 FT length so future runs match earlier work. The Web Description and SAP Description both restate 15/16X.018 NATURAL TEAK PVC 600FT, reinforcing the same dimensional and material details for consistent selection inside a shop or purchasing system.
The Natural Teak edgebanding is PVC, which fits into standard Edgebanding & Surfacing workflows where synthetic banding is machined, trimmed, and finished on typical shop equipment.
This Natural Teak PVC edgebanding is 15/16 inch wide, giving coverage across common panel edges with extra material for trimming back to a flush finished edge.
The Natural Teak edgebanding is .018mm thick, creating a relatively slim band that helps the edge transition remain subtle on cabinet and furniture components.
This PVC edge banding is supplied as a 600 FT length, supporting extended production runs on edgebanders across multiple panels or full project sets.
Part number 716041-199 identifies this specific Natural Teak PVC edgebanding in 15/16 inch width, .018mm thickness, and 600 FT length for ordering and repeat jobs.
The Natural Teak color lets the PVC band visually align with panels in a similar tone, so edges on doors, shelves, and cases follow the same overall appearance.
Choosing this Natural Teak Edgebanding .018mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. gives shops a PVC edge banding sized for common panel work with a Natural Teak tone that carries across multiple pieces. The 15/16 inch width and .018mm thickness combine to support trimming to a flush, modest edge profile, while the 600 FT length suits ongoing cabinet, furniture, or casework runs. For operations sourcing from Wurth Baer Supply, the 716041-199 identifier ties this exact Natural Teak PVC edgebanding into purchasing and job repeatability.
Sold In: 1 Roll