North Sea edgebanding 3mm identifies this PVC edge banding as a 3mm thick, North Sea color strip designed to finish exposed edges on panels, doors, and shelves. The 15/16 inch width covers common panel thicknesses while giving a small margin for precise trimming, which supports clean visual lines on cabinet and furniture projects. The 300 FT length supplies enough material for longer runs or multiple jobs from a single roll, which helps maintain color consistency across a project. The PVC construction defines it as a plastic edgebanding solution suited to edging work where a coordinated North Sea color is required. The 3mm thickness provides a more substantial edge profile than thinner banding, which is useful when a pronounced edge detail is part of the design. Identifying manufacturer part 302124-072 ties this roll directly to Rehau, Inc. for repeat purchasing.
This edge banding is identified as 3mm thick, which gives a substantial edge that stands up visually on cabinet fronts and shelves while allowing smooth trimming and finishing along the panel edge. The 15/16 inch width is sized to span standard panel thicknesses with slight overhang, so installers can trim back to a crisp line without risking core exposure at the face. Because it is PVC edgebanding, it pairs with typical edgebanding workflows using standard equipment suited for PVC materials, supporting efficient runs on shop edgebanders. The specified 300 FT roll length supports continuous application along multiple cabinets or tall panels, reducing splice points that can interrupt the finished look.
This product is classified as PVC edgebanding and edge banding, positioning it for use on exposed edges of panels, doors, drawer fronts, and shelves in woodworking projects. The North Sea designation defines its color, so it serves projects that require a North Sea edge tone on casework. The 3mm thickness supports applications where a more noticeable edge detail is desired, such as premium cabinet fronts or shelving with visible edges. With a width of 15/16 inch, it is suited to covering the edges of common panel sizes used in cabinetry and furniture construction, giving enough overhang for trimming while keeping waste low. The 300 FT length lets a shop edge multiple units or an entire room of casework using the same roll for consistent North Sea color.
The clearly specified 3mm thickness enables repeatable machine setup, as operators can dial in cutter, trimmer, and pressure settings for this edge profile and expect consistent results from roll to roll. The 15/16 inch width gives a predictable sizing reference for edgebander guides and trimmers, which helps maintain a uniform reveal on every panel run. Identifying the material as PVC tells technicians what material behavior to expect during heating, pressing, and trimming, supporting smooth workflow on standard PVC-capable equipment. The Rehau, Inc. manufacturer reference and part number 302124-072 provide a precise identifier, reducing substitution risk when reordering and helping shops maintain alignment between sample boards, drawings, and finished jobs. The 300 FT roll length supports planning for job quantities, as estimators can relate edge lineal footage directly to the length specified here.
North Sea edgebanding 3mm is a PVC edge banding classified as edge banding and edgebanding, PVC, so it is used to finish exposed panel and cabinet edges with a defined North Sea color.
This Rehau PVC edge banding has a 3mm thickness and a 15/16 inch width, giving a substantial edge profile with enough overhang for trimming panels to a clean finished line.
The 302124-072 North Sea edgebanding roll is 300 FT long, supporting extended runs on cabinets and panels while keeping color and material consistent throughout a project.
This 15/16 inch North Sea edge banding is PVC, which suits workflows and equipment configured for PVC edgebanding in cabinet and furniture shops.
This North Sea PVC edgebanding 3mm is manufactured by Rehau, Inc., giving shops a defined brand and manufacturer part number 302124-072 for consistent reordering.
The 3mm thickness creates a more pronounced edge detail than thinner banding, which supports a solid, finished look on cabinet fronts, doors, and shelving edges.
This North Sea edgebanding 3mm brings together 3mm thickness, 15/16 inch width, and a 300 FT length in a PVC edge banding from Rehau, Inc., identified as part 302124-072. That combination supports consistent North Sea-colored edges across cabinets, shelves, and casework in professional woodworking environments. Selecting this defined width, thickness, and color allows estimators, programmers, and installers to align drawings and machine setups to a single, repeatable PVC edgebanding choice.
Sold In: 1 Roll