Kessebohmer base cabinet pullout organizer describes a base cabinet organizer pull-out with adjustable shelves that creates a sliding storage zone inside a base cabinet, so stored items move out toward you instead of staying buried in the cabinet depth. The organizer is designed as a base cabinet organizer pull-out, which focuses the storage upgrade on lower cabinets where access is usually tight and awkward. A load rating of 60 lbs means the pullout supports a substantial combined weight of stored contents, so typical daily-use items stay stable on the shelves during movement. Shelf depth x shelf height of 20.375 in D x 4.1875 in H sets a defined storage envelope for each shelf, which helps plan what will stand securely on the surface without interfering with the cabinet opening. The category of Base Cabinetry Organizers and Fillers positions this unit as part of a system approach to organizing base cabinetry runs.
The base cabinet organizer pull-out uses a soft-close slide mechanism, which slows and completes the closing stroke so the pullout settles into the cabinet without a hard impact. This soft-close slide mechanism reduces abrupt stop forces on the frame and adjustable shelves, which supports smoother operation over repeated open-and-close cycles. The application listing of door/drawer ties the pullout movement to a cabinet door or drawer-style front, which lets the front move as a single unit with the organizer for a clean, integrated appearance. A top guide referenced in the description works with the soft-close slide mechanism to control side-to-side movement, which helps the shelves track straight and reduces racking as the unit extends. The door bracket mention indicates a defined connection point between the moving frame and the cabinet front, which supports consistent alignment of the front during operation.
The SAP description lists 20 in-28 in H for the unit, which targets base cabinet openings in that height range so the sliding frame can travel fully while keeping the shelves within the cabinet envelope. Identifying the product as a base cabinet organizer pull-out directs it toward lower kitchen or bath cabinets where vertical clearance and access can benefit from a frame-guided system. The application noted as door/drawer means the organizer is configured for installations where the cabinet front is attached to the moving frame, so the whole assembly moves together when the front is pulled. The 3.875 MCO reference in the SAP description identifies this specific height and configuration variant within the Dispensa BPO family, which helps match the organizer to cabinets designed around that dimension range.
The soft-close slide mechanism referenced in the web description manages deceleration at the end of travel, which helps the frame, metal shelves, and stored contents settle consistently into the same closed position. A load rating of 60 lbs sets a clear capacity limit for the moving frame, which supports predictable performance when planning how much weight can be placed on the adjustable shelves. Shelf depth of 20.375 in D defines how far items can extend from the back edge, which helps installers position the frame so the loaded shelves clear the door opening through the full slide stroke. Shelf height of 4.1875 in H establishes the side containment zone for stored items, which helps keep containers upright when the organizer is moved on its soft-close slide mechanism. The mention of a top guide in the description shows that the frame is supported both low and high in the opening, which helps keep the organizer tracking square to the cabinet face over time.
The Kessebohmer Dispensa BPO organizer lists 20 in-28 in H, which targets base cabinet openings within that height range so the frame and adjustable shelves can travel correctly.
The base cabinet organizer pull-out has a load rating of 60 lbs, which defines the combined weight that the metal shelves and frame are designed to handle in regular use.
The organizer uses shelves with a depth of 20.375 in D, which sets how far stored items can extend from the back and still ride fully on the sliding frame.
The Dispensa BPO shelves have a height of 4.1875 in H, which establishes the containment lip that helps keep items stable during the slide movement.
The base cabinet organizer uses a soft-close slide mechanism, which slows the final closing motion so the frame and contents return smoothly to the cabinet position.
The application note of door/drawer and the door bracket reference show the organizer is designed for attachment to a cabinet front so they move together.
The Kessebohmer Dispensa Silver 3-3/8 in 2-shelf base cabinet pullout organizer with soft-close slides offers a base cabinet organizer pull-out format, adjustable shelves, and a 60 lbs load rating, which combine into a defined solution for organizing 20 in-28 in H base cabinets. The 20.375 in D x 4.1875 in H shelf dimensions provide clear planning numbers for arranging stored items within the frame, while the soft-close slide mechanism and top guide support controlled movement in daily use. For projects calling for a Kessebohmer USA Inc base cabinet organizer matched to SAP description DISPENSA BPO, 3.875 MCO, 20-28 H, SV-SV, this BOMDB3820SV model aligns those details for straightforward selection.
Sold In: 1 Kit