Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fulterer FR 3002 is a 15 inch full-extension undermount drawer slide with integrated soft-close, built for frameless cabinets where a white finish keeps the hardware from competing with the interior. It mounts concealed beneath the drawer box and delivers a smooth, damped close on ball bearings, rated 75 lb per pair.
Most undermount slides ship in zinc because the finish stays hidden under the drawer box. The white version matters in two situations: open-front frameless casework where the slide is visible from an angle, and all-white interiors where a zinc glint against white melamine draws the eye. Bathroom vanities, laundry cabinets, painted kitchen uppers converted to drawer banks, and closet pull-outs in white melamine are the natural fits. At 15 inches, this slide suits smaller drawers — spice pulls, utensil trays, and bathroom storage — where a clean interior matters as much as the front hardware does.
Steel members with a white finish carry the drawer on a ball-bearing carriage that stays smooth under load. The soft-close damper is integrated into the slide body, so there are no add-on mechanisms to install or replace. Because the slide is concealed beneath the drawer box, the white coating serves a visual purpose at the edges and front of the slide, keeping the hardware neutral in a light-colored interior. The FR 3002 series is Fulterer's undermount program in this class, built on a steel body sized for 15 inch drawer boxes.
Cabinet shops and installers finishing frameless casework in white or light finishes will find this slide saves a step — no painting over zinc hardware visible at the slide's front edge. Homeowners renovating bathroom vanities or painted kitchen cabinets get a soft-close concealed slide that holds its neutral finish over time. At 75 lb per pair and full extension, it covers standard residential drawer loads without stepping up to a heavier-duty class. Build the drawer box to the FR 3002 specification — correct nominal length, box width, bottom recess, and rear notch — and the slide installs directly into the frameless side panel.
This SKU is the frameless version. It is designed to mount directly to the flat side of a frameless cabinet box. For face-frame cabinets, a face-frame version with rear mounting bracket support is the correct choice — this slide does not include that configuration.
The drawer side thickness specification for the FR 3002 series is not confirmed in the available attribute data. Contact us before ordering if your box is built from 3/4 inch material, as side-thickness versions are not interchangeable on undermount slides.
Locking device inclusion is not confirmed for this SKU. Undermount front locking devices are series-specific and must match the FR 3002 series — verify what ships with the slide and order the matching locking devices separately if needed.
75 lb is the rating per pair, which is how undermount slide capacity is stated throughout this category. Do not double the number — a pair of slides carries 75 lb total.
No. Undermount slides require the drawer box to be built to the maker's specification: correct nominal length, box width formula, bottom recess, and rear notch for the locking devices. An off-spec box will not seat properly on the slides.
When the interior finish matters as much as the drawer motion, the white FR 3002 keeps hardware neutral, closes silently, and carries the load — all from a slide that stays out of sight.
Sold In: 200 Pair