Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 14 inch full-extension side-mount ball bearing drawer slide from Fulterer's FR 5000 series, rated 100 lb per pair, with a zinc finish that blends into the cabinet interior and standard-motion ball bearing travel that needs no mechanism to get in the way.
A 14 inch slide suits shallower cabinets and smaller drawer boxes — think spice pullouts, bathroom vanity drawers, narrow base cabinets, and compact utility drawers in the shop or laundry room. Full extension at this length means the whole drawer box clears the opening, so even a short drawer gives up nothing at the back. The standard-motion action makes this slide a natural fit anywhere you plan to add a separate push-to-open mechanism, since there is no closing feature to work against it.
The FR 5000 members are cold-formed steel, running on hardened steel ball bearings in continuous raceways. The zinc finish provides indoor corrosion resistance — it is the segment's workhorse protective coat, not a decorative one. Zinc does not stand out when the drawer is open, which suits painted interiors, white melamine, and any cabinet where the hardware should disappear. This is not a stainless or exterior-rated finish; keep it in dry, indoor installations.
Volume cabinet shops will recognize the FR 5000 as a reliable production slide — consistent tolerances, non-handed stock that does not require left-right sorting on the bench, and a 1/2 inch side clearance that matches the standard drawer box formula. Contractors retrofitting a bathroom vanity or kitchen spice bank get full extension and a 100 lb rating without paying for motion hardware they do not need. Homeowners tackling a cabinet refresh get a straightforward install: mount both slides level on the cabinet sides, hang the drawer, and done. In face-frame cabinets, plan for rear mounting brackets — the slide needs support at the back end, and those brackets are sold separately.
No. The slide length is the closed measurement of the hardware — 14 inches. Because this is a full-extension slide, the drawer travels approximately its full slide length, bringing the whole box clear of the cabinet face. Slide length and drawer travel are two separate specs; they happen to be close on full-extension models but are not identical.
Standard motion means no soft-close, no self-close spring, and no hold-in detent. The drawer rolls freely on the ball bearings and stays wherever it is left. If you want the drawer to close on its own or to close quietly, you would need a different motion version.
The FR 5000 requires 1/2 inch of side clearance per slide, so build the drawer box 1 inch narrower than the cabinet opening in total. Both slides in the pair use the same clearance.
No. The slide is non-handed — one design works on either side of the drawer. Order the quantity you need without sorting for handedness.
Yes. In a face-frame cabinet the slide's back end needs support from a rear mounting bracket. Those brackets are sold separately and are series-specific, so confirm compatibility when you order.
When the drawer just needs to open all the way, carry the load, and stay put, the Fulterer FR 5000 in zinc does exactly that — no extra features, no extra cost, and no extra parts to sort on the shop floor.
Sold In: 1 Pair