Edgebanding 3349YS StudioTeak .018" Thick x 15/16" Width provides a StudioTeak edge detail that covers raw panel edges, so cabinet and furniture projects present a finished, coordinated look along every exposed side. The .018 inch thickness defines how the Doellken Woodtape material meets the face surface, giving a slim, controlled transition that suits modern casework where a low-profile edge is preferred. The 15/16 inch width is sized to cover standard panel thickness with a small trim margin, which supports efficient flush-trimming without excessive waste along long runs. As a PVC edgebanding from the Doellken Woodtape brand, this product is positioned for edging applications where a consistent, manufactured color and pattern identity such as StudioTeak is required across multiple parts, helping shops keep visible edges visually aligned with matching surfaces.
The .018 inch thickness on this Edgebanding 3349YS StudioTeak .018" Thick x 15/16" Width sets how much material projects from the substrate edge, which influences trimming passes and helps installers predict how the edge will feel against adjacent components. The 15/16 inch width allows the edgebanding to overhang both sides of common panel thicknesses before trimming, supporting clean flush edges after machining. The PVC edgebanding classification places this material in the Edgebanding & Surfacing | Edgebanding, PVC category, so it is suited to installations where a PVC edge is planned as part of the panel construction sequence.
This product is categorized as Edgebanding & Surfacing | Edgebanding, PVC, so it is intended for edge finishing on panels in woodworking and related shop environments where PVC edging is specified. The StudioTeak identity in the product name and SAP description 15/16"X.018" STUDIO TEAK 600FT indicates a StudioTeak visual design, which supports projects that call for that specific decorative look along exposed edges. The 600 foot reference in the SAP description aligns with production scenarios where multiple cabinets, shelves, or panels share the same StudioTeak finish and require a continuous supply for consistent results across a job.
The .018 inch thickness of this Doellken Woodtape edge banding defines how aggressively trimming tools engage the material, which helps operators set up cutters and feed speeds to maintain smooth edges and limit unnecessary passes. The 15/16 inch width gives a defined amount of overhang relative to common panel sizes, allowing fabricators to position the edgebanding confidently and remove the surplus to leave a uniform StudioTeak strip on both faces of the panel edge. The manufacturer part number 3349YS-1518-1 uniquely identifies this specific StudioTeak size and thickness, which reduces selection errors when repeat orders are placed for production work that depends on the same appearance and dimensions.
Edgebanding 3349YS StudioTeak .018" Thick x 15/16" Width is a PVC edge banding from Doellken Woodtape, used to cover and finish exposed panel edges in woodworking and surfacing projects.
The .018 inch thickness provides a relatively thin edging layer, so trimming and profiling operations remove less material and can be set for light, controlled cuts along the panel edge.
The 15/16 inch width offers coverage beyond typical panel thickness, giving installers margin to trim both faces flush while maintaining full StudioTeak coverage across the edge.
The StudioTeak designation in the name and SAP description identifies the specific StudioTeak visual identity, which helps match edge banding appearance with StudioTeak-themed surfaces.
The SAP description 15/16"X.018" STUDIO TEAK 600FT indicates a 600 foot length, supporting extended production runs using the same StudioTeak edge material.
The manufacturer part number 3349YS-1518-1 identifies this exact Doellken Woodtape StudioTeak PVC edgebanding, helping shops reorder the same thickness, width, and design for consistent projects.
Edgebanding 3349YS StudioTeak .018" Thick x 15/16" Width from Doellken Woodtape offers a defined StudioTeak edge detail in a PVC edgebanding format, aligning appearance, thickness, and width for panel edge finishing. The combination of .018 inch thickness and 15/16 inch width directly supports trimming workflows that target a slim, clean edge profile on cabinets and furniture parts. For projects built around a StudioTeak visual theme, this 600 foot StudioTeak run helps maintain the same edge style across multiple components.