Edgebanding 3783 Suomi Birch .018" Thick x 15/16" Width

Edgebanding 3783 Suomi Birch For Clean Edges

Edgebanding 3783 Suomi Birch .018" Thick x 15/16" Width gives you a PVC edge banding sized for standard panel projects where a Suomi Birch look is required along the edge. The .018 inch thickness keeps the edge profile low, which helps panels sit properly in cases, runs, or assemblies without adding bulk. The 15/16 inch width covers common board thicknesses with a bit of overhang, allowing tight trimming for a finished edge. As a Doellken Woodtape product, it aligns with professional edgebanding workflows where consistent material behavior across long jobs is important. The PVC construction places it in the Edgebanding & Surfacing, Edgebanding, PVC category, so it works in applications calling for PVC rather than wood or laminate. The 3783 Suomi Birch identification points to a specific visual tone, helping match edges to a coordinated Suomi Birch surface in cabinet or furniture runs.

Key PVC Edgebanding Details That Support Work

• The .018 inch thickness keeps the banding light at the edge, so trimmed parts handle more like bare board while still covering exposed substrate on cabinets and casework.
• The 15/16 inch width provides coverage across typical panel thicknesses, giving installers enough material to trim flush for a clean, straight finished edge on doors, shelves, or panels.
• The 3783 Suomi Birch designation ties the color and pattern to a specific Suomi Birch look, which helps maintain visual continuity between faces and edges on coordinated jobs.
• The Doellken Woodtape brand identifies it as part of a dedicated edge banding line, supporting shops that prefer to standardize on a single manufacturer for repeatable performance.
• The SAP description reference to 600FT signals a long-run format, which suits production environments where extended continuous edgebanding reduces mid-job material changes.

Edgebanding 3783 Suomi Birch Fit And Application

This Edgebanding 3783 Suomi Birch .018 inch Thick x 15/16 inch Width is sized for projects needing a narrow PVC strip along exposed panel edges, such as cabinet sides, shelves, or door blanks. The .018 inch thickness means the edge profile remains slim after trimming, which can help when parts need to slide, stack, or align closely in built-ins and furniture. The 15/16 inch width works across typical sheet goods where a modest overhang is preferred prior to trimming, supporting efficient passes through edge trimmers or manual tools. As a PVC edge banding in the Edgebanding & Surfacing category, it fits workflows where synthetic edging is favored for its consistent form along the entire length. The Suomi Birch designation helps match to corresponding Suomi Birch surfaces so finished parts read as a single visual set.

Using Suomi Birch Edge Banding In Real Work

Where Suomi Birch Edge Banding Performs Best

Suomi Birch edge banding with a .018 inch thickness and 15/16 inch width performs well on projects built around Suomi Birch design schemes, such as cabinets, fixtures, or furniture pieces using coordinated birch-look surfaces. The modest thickness supports those builds by keeping the edge transition subtle, which helps panels present a more unified face and edge when viewed straight on. The 15/16 inch width lets installers position the banding with slight overhang on both faces, then trim back to the panel for an accurate, repeatable reveal. Because this product is PVC edge banding, it aligns with applications where shops want a consistent, manufactured edge material along the entire 600-foot run. In production or batch work, that consistency can reduce variation from part to part, so matching doors, shelves, and sides line up visually when installed together.

Why These Dimensions Support Repeatable Results

The .018 inch thickness on this Doellken Woodtape edgebanding matters because a thinner PVC edge can reduce the step between face material and edge after trimming, which supports smoother joints where parts meet, such as cabinet doors against face frames. The 15/16 inch width is significant in day-to-day work because it provides enough coverage over typical panel thicknesses without excessive waste, supporting efficient feed-through on edgebanders or steady hand-application and trimming. The defined 3783 Suomi Birch identification also carries weight in replacement or expansion jobs, since matching that number allows shops to align new edges with existing Suomi Birch installations. With the Manufacturer Part # 3783-1518-1 and SAP description 15/16"X.018" SUOMI BIRCH 600FT, purchasing and reordering the exact same material becomes straightforward, which is important when standardizing materials across multiple projects or locations.

Common Questions About 3783 Suomi Birch Edgebanding

Select Edgebanding 3783 Suomi Birch For Your Run

Edgebanding 3783 Suomi Birch .018" Thick x 15/16" Width from Doellken Woodtape gives you a defined Suomi Birch PVC edge solution sized for common panel work. Using the 3783-1518-1 identification ties your project to this exact thickness, width, and Suomi Birch appearance, supporting consistent outcomes across cabinets, fixtures, or furniture pieces built on the same visual standard.