PVC edgebanding 4894 Monticello Maple describes a PVC edge banding in the Monticello Maple color, giving panel edges a coordinated, finished look wherever that color is specified. The 3mm thick profile builds a solid edge that visually matches thicker fronts, which helps panels read as sturdier components in cabinetry or surfacing work. The 1-5/16 inch width covers standard panel thicknesses with room to trim back, supporting clean scribe lines after machining. Supplied on a 328 foot roll, the material supports longer runs or multiple cabinets from a single coil, reducing changeovers on repetitive jobs. Doellken Woodtape branding identifies it as part of a dedicated edgebanding line, which supports consistent color and texture when using other pieces labeled the same way. The PVC construction suits typical edgebanding equipment workflows where operators rely on predictable trimming and scraping behavior around corners and straight runs.
The 3mm thickness sets expectations for machine setup, as operators can dial in trimming and scraping passes knowing they are working with a thicker PVC edge banding rather than a thin tape. The 1-5/16 inch width provides ample coverage over panel edges, giving room for typical overhang before trimming, which supports clean, square edges after processing. With a 328 foot roll length, shops can load the coil once and run multiple panels or full cabinet jobs, which keeps machines running with fewer interruptions. The PVC material aligns with standard edgebanding equipment that is designed to process PVC, so shops working within that category can integrate this roll into existing workflows focused on PVC edge processing.
This PVC Edgebanding, Color 4894 Monticello Maple, 3mm Thick 1-5/16 x 328 Roll is positioned for projects calling for Monticello Maple color on exposed panel edges, such as cabinetry or surfacing where that tone is used on faces. The Monticello Maple designation signals that the edge material is intended to visually coordinate with surfaces identified by that same color reference, supporting consistent appearance around doors, drawer fronts, and casework sides. As a 3mm thick PVC edge banding classified under Edgebanding & Surfacing, it suits applications where a more substantial edge is preferred over thin tape, such as higher-use areas or design schemes featuring pronounced edge reveals. The 1-5/16 inch width and extended 328 foot length make it practical for runs involving multiple panels of similar thickness, allowing a single roll to serve an entire project or a series of related builds. Doellken Woodtape branding anchors it within a known edge banding product class, which matters in shops that standardize on specific lines for consistent appearance and handling from job to job.
The 3mm thickness of this Doellken Woodtape PVC edgebanding provides a predictable amount of material for trimming and scraping, so operators can set up machines to cut back the edge without cutting into the panel, supporting repeatable results. The 1-5/16 inch width gives generous overhang relative to many panel cores, which simplifies alignment during application because the banding does not need to be positioned with extreme precision to achieve full edge coverage. Its classification as PVC Edgebanding in the Edgebanding, PVC category confirms it is part of a material group that behaves consistently under edgebanding equipment designed for PVC, which helps maintain stable feed and finishing characteristics across batches. The 328 foot roll length reduces the frequency of roll changes during long production runs, which helps keep setup parameters constant across many parts, limiting variation introduced by mid-job material swaps. The manufacturer part number 4894-2103-1 offers a clear identifier that can be referenced when reordering, supporting shops that rely on exact repeats of color, thickness, and roll width to match existing installations or maintain standards across multiple locations.
This PVC edgebanding is 3mm thick, 1-5/16 inch wide, and supplied as a 328 foot roll, which supports substantial edges, generous trimming allowance, and extended production runs.
The 4894 Monticello Maple color designation identifies the specific maple tone this PVC edgebanding is matched to, helping edges visually coordinate with panels using the same color reference.
The 3mm thickness provides a robust edge layer, allowing edgebanders to be set for controlled trimming and scraping without risking cuts into the panel surface.
The 1-5/16 inch width covers common panel thicknesses with extra material, which supports easier alignment and clean trimming to a flush, finished edge.
The 328 foot roll length enables long or repeated runs from a single coil, helping maintain consistent settings and reducing interruptions during cabinet or surfacing jobs.
Doellken Woodtape branding and the 4894-2103-1 part number identify a specific PVC edge banding, supporting accurate reordering for matching color and dimensions.
This PVC Edgebanding, Color 4894 Monticello Maple, 3mm Thick 1-5/16 x 328 Roll from Doellken Woodtape provides a defined combination of color, thickness, width, and length for edge finishing. When projects call for the 4894 Monticello Maple tone with a substantial 3mm PVC edge on typical panel thicknesses, this 1-5/16 inch wide, 328 foot roll aligns that requirement with a format suited to extended runs and repeatable machine setup.