American Veneer Maple Edgebanding 3mm sets up a straightforward way to finish exposed panel edges with a consistent maple look. This American Veneer Technologies edge banding uses maple veneer so the edge visually matches maple-faced sheet goods, which helps cabinets and fixtures read as a single, unified piece. The 3mm thickness adds a substantial edge profile compared with thin tape, which supports a more solid feel at doors, drawer fronts, or shelving. With a 7/8 inch width, this banding gives coverage for typical 3/4 inch panels while leaving working margin for trimming, so installers can flush the edge to the face without starving coverage. Identified as edge banding and part of the wood edgebanding category, it fits naturally into standard woodworking workflows where a wood veneer edge is preferred over plastic or unfinished substrates.
This American Veneer maple edge banding uses a 3mm thickness, which gives installers a forgiving amount of material to work when trimming flush to the face, especially on long cabinet runs. The 7/8 inch width pairs with typical 3/4 inch panels, leaving a small margin top and bottom so edges can be slightly overhung during application and then brought back with trimmers or hand tools. Defined as wood edgebanding in the edgebanding and surfacing category, it fits into workflows where a veneer edge is applied as a separate step after panel cutting and machining, supporting clean transitions between raw panel stock and finished casework.
This product is classified as edge banding and specified as American Veneer Maple Edgebanding 3mm Thick x 7/8 inch Width, which positions it for finishing exposed edges on cabinet boxes, shelving, and furniture-grade panels built around maple. As part of the Edgebanding & Surfacing category under wood edgebanding, it suits jobs where a veneered edge is preferred to carry the maple look around corners and across door or panel perimeters. The maple veneer description aligns it with maple-faced sheet goods and solid maple components, which helps maintain visual continuity between cabinet sides, doors, and shelves. With its 3mm thickness and 7/8 inch width together, it works well on most 3/4 inch substrates used in casework, giving both coverage and trimming margin at verticals, horizontals, and toe spaces that remain visible in the finished installation.
The 3mm thick designation gives a predictable, repeatable edge size that fabricators can account for in design dimensions, especially on doors and drawer fronts where total thickness matters at reveals and clearances. That thickness also offers a firmer surface along front edges, which helps maintain a clean line after trimming and light sanding across production runs. The 7/8 inch width is clearly defined, so layouts for ripping panels and planning overhangs at edges can rely on that known coverage. The MAPL78-3R manufacturer part number ties every reorder back to the same 3mm by 7/8 inch maple specification, which supports consistent looks across phases of a project or when matching existing installs. Being branded American Veneer Technologies, the edgebanding can be specified by name in shop drawings or material lists, reducing ambiguity between purchasing and the shop floor.
The American Veneer Maple Edgebanding 3mm Thick x 7/8 inch Width measures 3mm in thickness and 7/8 inch in width, giving coverage and trimming allowance on typical 3/4 inch panels.
The American Veneer Maple Edgebanding 3mm uses maple veneer, aligning visually with maple-faced panels and maple components in cabinet or furniture projects.
The 3mm thick construction of this maple edgebanding provides a substantial edge that trims cleanly and offers a solid-feeling front edge on cabinet doors, drawer fronts, and shelving.
The 7/8 inch width gives slight overhang beyond 3/4 inch panels, allowing installers to apply, then trim the edge banding perfectly flush without exposing the panel core.
The MAPL78-3R manufacturer part number identifies this specific 3mm thick, 7/8 inch wide American Veneer maple edgebanding, simplifying reorders and consistent specification across projects.
This maple edgebanding is produced by American Veneer Technologies, providing a clear brand reference for matching veneer materials on woodworking jobs.
American Veneer Maple Edgebanding 3mm Thick x 7/8 inch Width offers a defined maple veneer edge solution for casework and panel projects. The 3mm thickness, 7/8 inch width, and MAPL78-3R part number together give clear, repeatable parameters for specifying, cutting, and edging maple-based builds. Selecting this American Veneer Technologies edge banding keeps the maple look consistent from face to edge, supporting clean, professional cabinet and furniture outcomes.
Sold In: 1 Roll